316L Stainless Steel Shim Stock 0.20mm x 200mm Wide
Cold-rolled 316L stainless steel shim stock foil at 0.20 mm thickness and 200 mm width, in coil form without additional surface treatments. Classified under HTS 7220.20.90.60 due to its narrow width under 300 mm, thin gauge ≤0.25 mm, and cold-rolled but not further worked status. Ideal for gaskets, spacers, and precision shimming in industrial machinery.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Thickness exceeding 0.25 mm shifts classification within the cold-rolled stainless steel hierarchy.
If imported as tubes made from this material
Products formed into tubes or pipes fall under Chapter 73 articles of iron or steel.
If made of high-strength steel alloy per U.S. note (a)
Meeting high-strength steel criteria (yield point specs) reclassifies to specific alloy steel bars and rods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include chemical composition analysis in entry documents to confirm low-carbon 316L grade suitability
• Declare exact coil dimensions; partial uncoiling during handling can lead to width mismeasurement errors
• Check for inadvertent phosphatizing or oil coating, as these qualify as further working under chapter definitions
Related Products under HTS 7220.20.90.60
304 Stainless Steel Cold-Rolled Foil 0.15mm Thick 150mm Wide
Thin cold-rolled stainless steel foil made from grade 304 alloy, measuring 0.15 mm in thickness and 150 mm in width, not subjected to any further surface working beyond cold reduction. This product falls under HTS 7220.20.90.60 as it is a flat-rolled stainless steel product less than 300 mm wide, not exceeding 0.25 mm thick, and classified as 'other' within the cold-rolled, not further worked category. It is commonly used in precision applications requiring corrosion resistance.
430 Stainless Steel Cold-Reduced Strip 0.18mm Thick 250mm Wide
Ferritic 430 grade stainless steel flat-rolled product, cold-reduced to 0.18 mm thickness and 250 mm width, without further working like coating or polishing. This matches HTS 7220.20.90.60 for stainless steel <300 mm wide, ≤0.25 mm thick, cold-rolled 'other' category. Used in automotive trim and appliance components for its magnetic properties and corrosion resistance.
321 Stainless Steel Foil 0.12mm x 100mm Wide Cold-Rolled
Stabilized 321 stainless steel cold-rolled foil, 0.12 mm thick and 100 mm wide, not further worked. Fits HTS 7220.20.90.60 precisely as narrow (<300 mm), ultra-thin (≤0.25 mm) cold-reduced stainless 'other' product. Applied in high-temperature exhaust systems and chemical processing equipment.
409 Stainless Steel Cold-Rolled Sheet 0.22mm Thick 280mm Wide
Ferritic 409 grade stainless steel cold-rolled into thin sheet of 0.22 mm thickness and 280 mm width, free of further surface treatments. Classified in HTS 7220.20.90.60 for its sub-300 mm width, ≤0.25 mm gauge, and cold-rolled 'other' status. Primarily used in automotive exhaust mufflers and catalytic converters.
310 Stainless Steel Thin Strip 0.10mm x 175mm Wide
High-temperature 310 stainless steel cold-reduced strip at 0.10 mm thickness and 175 mm width, not further worked. Meets HTS 7220.20.90.60 criteria for narrow, ultra-thin cold-rolled stainless steel 'other.' Employed in furnace parts and heat treatment fixtures.
17-4 PH Stainless Steel Foil 0.24mm x 120mm Cold-Rolled
Precipitation-hardening 17-4 PH stainless steel cold-rolled foil, 0.24 mm thick and 120 mm wide, without additional processing. Falls under HTS 7220.20.90.60 as 'other' thin (<0.25 mm), narrow (<300 mm) cold-rolled stainless. Used in aerospace springs and medical devices.