Cold-Rolled 304 Stainless Steel Foil 0.15mm Thick
Thin flat-rolled stainless steel foil made from 304 grade alloy with 18% chromium and 8% nickel (within 0.5-24% nickel range), cold-rolled to 0.15mm thickness and under 300mm width. Classified under HTS 7220.20.90.30 as not further worked beyond cold-rolling, specifically for thin strips used in precision applications. Meets chapter definitions for stainless steel without additional surface treatments like polishing or coating.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 0.25 mm
Thicker cold-rolled stainless steel strips shift to 7220.20.70.xx subheading while maintaining width and nickel specs.
If width of 600 mm or more
Wider flat-rolled stainless steel falls under Chapter 72 heading 7219 for products 600mm+ in width.
If further worked with polishing or coating
Any surface treatment beyond cold-rolling (per chapter note on 'further worked') moves to 7222 for worked stainless bars/rods/strips.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate confirming nickel content between 0.5-24% and exact dimensions to avoid reclassification; declare as 'not further worked' with no evidence of polishing or coating; watch for anti-dumping duties on certain stainless steel origins
Related Products under HTS 7220.20.90.30
316 Stainless Steel Cold-Reduced Strip 0.20mm
Cold-reduced strip of 316 stainless steel containing 10-14% nickel and 16-18% chromium, precisely 0.20mm thick and 250mm wide. Fits HTS 7220.20.90.30 for thin (<0.25mm), narrow (<300mm) cold-rolled stainless not further worked. Ideal for corrosion-resistant shims and gaskets in industrial use.
430 Stainless Steel Thin Cold-Rolled Sheet 0.18mm
Ferritic 430 grade stainless steel cold-rolled to 0.18mm thickness, width 280mm, with approximately 0.5-1% nickel meeting the subheading criteria. Classified in 7220.20.90.30 as narrow, thin cold-rolled stainless without further working. Used for decorative trims and appliance panels.
321 Stainless Steel Foil Strip 0.10mm Thick
Austenitic 321 stainless steel cold-rolled foil strip, 0.10mm thick, 200mm wide, with 9-12% nickel content. HTS 7220.20.90.30 applies to this thin, narrow, cold-reduced product not subjected to further working like coating. Suited for high-temperature seals and bellows.
Cold-Rolled 310 Stainless Steel Shim Stock 0.22mm
310 grade stainless steel cold-rolled to 0.22mm for shim stock, 290mm wide, containing 19-22% nickel. Precisely matches HTS 7220.20.90.30 for thin (<0.25mm), narrow stainless cold-reduced products without additional treatments. Common in machinery alignment and aerospace.
17-4 PH Stainless Steel Thin Strip 0.12mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled strip, 0.12mm thick, 150mm wide, with 3-5% nickel. HTS 7220.20.90.30 for its narrow width, thin gauge, and cold-rolled state without further working. Used in springs and precision instruments.
409 Stainless Steel Cold-Rolled Foil 0.24mm
Ferritic 409 stainless steel foil cold-rolled to 0.24mm thickness, 260mm wide, minimal nickel (~0.6%). Classifies under 7220.20.90.30 as thin, narrow cold-reduced stainless not further worked. Automotive exhaust applications.