410 Stainless Steel Cold-Reduced Foil Strip 1.2mm Thick
Martensitic 410 stainless cold-reduced strip referred to as foil in trade, 1.2 mm thick x 290 mm wide, not further worked. Precisely matches HTS 7220.20.70 for cold-rolled stainless under 300 mm wide in the 0.25-1.25 mm thickness band. Applied in cutlery blanks and valves.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width exceeds 600 mm (in flat form)
Chapter hierarchy: >600 mm stainless cold-rolled moves to heading 7221 regardless of further working.
If certified for razor blade manufacture
U.S. note (d) razor blade steel definition with specific thin/narrow criteria shifts to specialized provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use calipers for thickness verification; even slight variations near 1.25 mm boundary trigger reclassification
• Declare as 'not further worked' explicitly—any visual polish appearance requires proof of cold-rolling origin
• Segregate by grade; mixing 304/410 in same container complicates alloy verification during entry
Related Products under HTS 7220.20.70
316 Stainless Steel Cold-Reduced Sheet 0.8mm Thick
Cold-reduced sheet of 316 stainless steel, 0.8 mm thick and 280 mm wide, without additional processing beyond cold-rolling. Classified under HTS 7220.20.70 for stainless steel flat products under 300 mm wide, thickness 0.25-1.25 mm, not further worked. Ideal for corrosion-resistant applications in medical devices.
304 Stainless Steel Cold-Rolled Strip 0.5mm Thick
Cold-rolled flat strip of 304 stainless steel, 0.5 mm thick and 250 mm wide, not further worked beyond cold reduction. This falls under HTS 7220.20.70 due to its stainless steel composition, width under 300 mm, thickness between 0.25 mm and 1.25 mm, and lack of additional surface treatments like polishing or coating. Commonly used in precision stamping for small components.
430 Stainless Steel Cold-Rolled Strip 1.0mm Thick
Ferritic 430 grade stainless steel cold-rolled strip, 1.0 mm thick by 200 mm wide, not subjected to further working. Meets HTS 7220.20.70 criteria: stainless flat-rolled, <300 mm wide, 0.25-1.25 mm thick, cold-rolled only. Used in automotive trim and appliances.
201 Stainless Steel Cold-Rolled Band 0.3mm Thick
Austenitic 201 stainless steel cold-rolled band, 0.3 mm thick and 150 mm wide, solely cold-reduced without further treatments. Fits HTS 7220.20.70 as stainless flat-rolled product under 300 mm wide and specified thickness range. Popular for budget spring and clip manufacturing.
High-Strength 301 Stainless Cold-Rolled Strip 0.6mm
301 stainless steel strip meeting high-strength criteria, cold-rolled to 0.6 mm thick x 250 mm wide, without additional working. Classifies under HTS 7220.20.70 for stainless flat products in specified dimensions, distinguished from tool/high-strength notes by general use. Used in aerospace springs.
Medical-Grade 316L Stainless Cold-Rolled Sheet 0.4mm
Low-carbon 316L stainless cold-rolled sheet for medical applications, 0.4 mm thick x 280 mm wide, not further worked. HTS 7220.20.70 applies to its stainless composition, narrow width, and precise thickness range post cold-reduction. Essential for surgical instrument blanks.