AISI 416 Cold-Reduced Stainless Steel Slit Coil
Slit coil of free-machining AISI 416 stainless steel with 13% chromium and sulfur addition, 200 mm wide, 1.1 mm thick. Classified HTS 7220.20.70.60: cold-rolled stainless steel <15% Cr, width <300 mm, thickness 0.25-1.25 mm, no further working. Suited for screw and bolt manufacturing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If coated with plastics or paint
Coatings count as 'further worked' per Chapter Note, shifting to coated steel.
If < 600 mm width but plated or coated
Surface treatments on non-stainless equivalent would go to 7210.
If electrical resistance alloy composition
Special electrical alloys carved out to 7228 regardless of width/thickness.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Highlight sulfur content in certifications but confirm total Cr remains <15%
• Slit edges acceptable if done during cold-rolling process, not post-processing
• Avoid packaging that implies further working (e.g
• oiled surfaces may trigger review)
Related Products under HTS 7220.20.70.60
AISI 410 Cold-Rolled Stainless Steel Strip
Cold-rolled flat-rolled stainless steel strip made from AISI 410 grade with approximately 12% chromium content, width of 250 mm, and thickness of 0.8 mm. This product is not further worked beyond cold-rolling and falls under HTS 7220.20.70.60 due to its stainless steel composition with less than 15% chromium, width under 300 mm, and specified thickness range. It is commonly used in automotive trim and appliance components.
Martensitic 420 Stainless Steel Cold-Reduced Sheet
Cold-reduced sheet of martensitic AISI 420 stainless steel containing 13% chromium, 280 mm wide, 1.0 mm thick. Classified under HTS 7220.20.70.60 as a flat-rolled stainless steel product, cold-rolled only, with width <300 mm, thickness >0.25 mm ≤1.25 mm, and chromium below 15%. Ideal for cutlery blades and surgical instruments.
Ferritic 430 Cold-Rolled Stainless Steel Foil Stock
Cold-rolled ferritic AISI 430 stainless steel strip with 14.5% chromium, 290 mm width, 0.4 mm thickness for decorative trim. Falls under HTS 7220.20.70.60 as not further worked cold-rolled stainless <15% Cr, <300 mm wide, thickness exceeding 0.25 mm. Used in appliance panels and automotive molding.
13% Cr Martensitic Cold-Rolled Band Steel
Cold-rolled band steel of proprietary martensitic stainless with 13% Cr, 240 mm width, 0.7 mm thick for stamping. Fits HTS 7220.20.70.60 as stainless steel <15% Cr, not further worked than cold-rolled, narrow width, specified thickness. Applied in razor components and valves.
12% Chromium Cold-Rolled Stainless Steel Banding
Narrow cold-rolled stainless steel banding strip with 12% chromium, 150 mm width, 0.6 mm thickness, used for packaging strapping. Meets HTS 7220.20.70.60 criteria: stainless steel <15% Cr, cold-rolled not further worked, <300 mm width, thickness 0.25-1.25 mm. Provides corrosion resistance for industrial bundling.
Low Chromium 410S Cold-Rolled Steel Strip
Cold-rolled strip of stabilized 410S stainless steel variant with 11.5% chromium, 275 mm width, 0.9 mm gauge. HTS 7220.20.70.60 applies: flat-rolled stainless <15% Cr, cold-reduced only, <300 mm wide, 0.25-1.25 mm thick. Used in exhaust components and heat exchangers.