316Ti Stabilized Cold-Rolled Sheet 510mm Wide
316Ti titanium-stabilized stainless steel sheet, cold-rolled 510 mm wide, with 2.8% molybdenum and 11% nickel for weldability. Classified under HTS 7220.20.10.10 for cold-rolled stainless steel meeting width and alloy composition criteria.
Import Duty Rates by Country of Origin
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ti stabilization doesn't affect classification but document to prove not heat-treated beyond cold-rolling
• Ensure no interpass welds or anneals that could be viewed as further processing
• High-temperature service declaration may trigger end-use verification
Related Products under HTS 7220.20.10.10
300 Series Cold-Rolled Stainless Steel Sheet 430mm Wide
Cold-rolled flat-rolled stainless steel sheet, 430 mm wide, containing 17% chromium, 3% molybdenum, and 2% nickel. Classified under HTS 7220.20.10.10 due to width of 300-600 mm, cold-rolled but not further worked, and specific alloy composition with 1.5-5% molybdenum and 0.5-24% nickel.
316L Molybdenum-Alloy Stainless Steel Coil 500mm Wide
Cold-reduced 316L stainless steel coil, 500 mm wide, with 16-18% chromium, 2.5% molybdenum, and 10-12% nickel for corrosion resistance. Fits HTS 7220.20.10.10 as flat-rolled stainless steel, cold-rolled, 300+ mm wide, with specified molybdenum and nickel content.
317 Stainless Steel Cold-Reduced Strip 350mm Wide
317 grade stainless steel cold-reduced strip, 350 mm width, featuring 3.5% molybdenum and 11.5% nickel for superior corrosion resistance in harsh environments. HTS 7220.20.10.10 applies to its cold-rolled stainless steel composition, width specs, and alloying elements.
Custom 317LMN Cold-Rolled Stainless Sheet 450mm Wide
317LMN low-carbon stainless steel sheet, cold-rolled to 450 mm width, with 4.2% molybdenum and 13.5% nickel for urea plant applications. Meets HTS 7220.20.10.10 criteria for stainless flat-rolled products not further worked than cold-rolled with specified alloy limits.
Nitronic 50 Cold-Reduced Stainless Strip 420mm Wide
Nitronic 50 (XM-19) stainless steel strip, cold-reduced to 420 mm width, containing 4% molybdenum and 12% nickel for high-strength applications. HTS 7220.20.10.10 covers this not-further-worked cold-rolled stainless with required alloy percentages.
AL-6XN Cold-Rolled Stainless Steel Band 380mm Wide
AL-6XN super-austenitic stainless steel band, cold-rolled at 380 mm width, alloyed with 4.8% molybdenum and 20.5% nickel for seawater resistance. Precisely classified in HTS 7220.20.10.10 for its cold-rolled stainless steel form, width, and molybdenum/nickel composition.