Hot-Rolled Duplex Stainless Steel Strip 3.2mm x 260mm
Duplex 2205 stainless steel hot-rolled to 3.2 mm thickness and 260 mm width for corrosion resistance, hot-rolled only. HTS 7220.12.5000 due to stainless flat-rolled characteristics.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If universal mill plate not stainless
Non-stainless universal mill plates (U.S. Note b) under 7211, but stainless keeps Chapter 72 structure.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit duplex grade mill certs; verify no cladding or enameling
• Width tolerance must stay under 300 mm
Related Products under HTS 7220.12.50.00
17-4 PH Hot-Rolled Stainless Steel Sheet 2.8mm x 180mm
Precipitation-hardening 17-4 PH stainless hot-rolled sheet, 2.8 mm by 180 mm wide, untreated. Classed in HTS 7220.12.5000 for narrow hot-rolled stainless.
310 Hot-Rolled Stainless Steel Narrow Strip 1mm x 120mm
High-temperature 310 stainless hot-rolled strip at 1 mm thick and 120 mm wide, no further working. HTS 7220.12.5000 for thin, narrow stainless flat-rolled.
Hot-Rolled Stainless Steel Strip 1.5mm Thick 250mm Wide
A flat-rolled stainless steel product, hot-rolled to 1.5 mm thickness and 250 mm width, not further worked beyond hot-rolling. It falls under HTS 7220.12.5000 due to its stainless steel composition, thickness under 4.75 mm, and width under 300 mm, with no additional surface treatments like polishing or coating.
AISI 304 Hot-Rolled Stainless Steel Sheet 3mm x 280mm
Hot-rolled AISI 304 stainless steel sheet measuring 3 mm thick and 280 mm wide, supplied in straight lengths without further processing. Classified under HTS 7220.12.5000 for stainless steel, hot-rolled only, thickness <4.75 mm, and width <300 mm.
430 Grade Hot-Rolled Stainless Steel Band 2.5mm Thick 150mm Wide
Ferritic 430 stainless steel hot-rolled into a band of 2.5 mm thickness and 150 mm width, not in coils and free of further working. Fits HTS 7220.12.5000 precisely as hot-rolled stainless steel under 4.75 mm thick and 300 mm wide.
316L Hot-Rolled Stainless Steel Slit Coil Strip 1.2mm x 200mm
Low-carbon 316L stainless steel slit into 1.2 mm thick by 200 mm wide hot-rolled strips from coil, without additional treatments. HTS 7220.12.5000 applies to its stainless steel, hot-rolled state, thin gauge, and narrow width.