Low Chromium 430 Stainless Steel Sheet
Flat-rolled 430 stainless steel sheet with 14% chromium by weight, 800 mm width, 3 mm thick, for appliance panels. Fits HTS 7219.90.00.60 as other stainless flat products over 600 mm, not meeting 15% Cr threshold or tool steel specs. Hot-rolled finish without polishing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If electrical non-grain oriented
Silicon-electrical properties classify under 7219.22 for stainless electrical sheets.
If narrower than 600 mm
Sub-600 mm width stainless strips fall under 7220 series.
If coated with plastics
Further worked via nonmetallic coating per note reclassifies to clad/plated steels in 7210.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Label as 'not heat-resisting' if C >0.3%; 2
• Provide origin certificates for quota checks; 3
• Inspect for rust/discoloration—no duty allowance per Chapter note
Related Products under HTS 7219.90.00.60
AISI 439 Stainless Steel Sheet
Flat-rolled stainless steel sheet conforming to AISI 439 grade with approximately 17% chromium but certified as containing less than 15% by weight overall due to specific alloy composition, width over 600 mm, used in automotive exhaust systems. This falls under HTS 7219.90.00.60 as flat-rolled stainless steel products, not cold-rolled, of width 600 mm or more, other, containing less than 15% chromium. It meets Chapter 72 definitions for stainless steel despite chromium content nuance.
17-4PH Precipitation Hardening Stainless Plate
Hot-rolled flat plate of 17-4PH stainless steel with balanced chromium at 14.5% by weight, width 1,200 mm, thickness 6 mm, for aerospace components. Classified under HTS 7219.90.00.60 for flat-rolled stainless steel over 600 mm width, other categories, low chromium content per note. Not further worked beyond rolling.
Ferritic 409 Stainless Steel Coil
Coiled flat-rolled 409 grade stainless steel with 11% chromium, width 1,000 mm, for muffler manufacturing. HTS 7219.90.00.60 applies to other flat-rolled stainless steel >=600 mm width, <15% Cr, hot-rolled not cold-formed. Excludes razor blade or universal mill plate definitions.
Martensitic 410 Stainless Steel Plate
Hot-rolled 410 grade stainless plate, 12.5% Cr, 1,500 mm width, 10 mm thick for valve bodies. Under HTS 7219.90.00.60 for stainless flat-rolled >=600 mm, other/other, low Cr content excluding chipper knife steel. Not ball-bearing steel composition.
Duplex 2205 Low Cr Variant Stainless Coil
Coiled duplex stainless with adjusted 13.8% Cr, 900 mm width for chemical tanks. HTS 7219.90.00.60 covers this flat-rolled stainless, width 600mm+, not further worked, below 15% Cr threshold. Excludes high-strength steel yield specs.
Custom 12% Chromium Stainless Sheet
Specialty flat-rolled stainless sheet with 12% Cr for furnace parts, 700 mm width, not tool steel. Classified HTS 7219.90.00.60: stainless, >=600 mm, other flat-rolled <15% Cr. No deformations or patterns.