304 Stainless Steel Cold-Rolled Coil 0.4mm x 1219mm
Thin cold-rolled stainless steel coil made from 304 grade alloy, with thickness of 0.4 mm, width of 1219 mm, and supplied in coils weighing up to 20 tons. Classifies under HTS 7219.35.0035 as flat-rolled stainless steel, not further worked than cold-rolled, under 0.5 mm thick, in coils, and not fitting specific alloy exceptions. Used primarily for manufacturing kitchen appliances and food processing equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness of 3 mm or more
Thicker cold-rolled stainless coils shift to 7219.32 as classification follows thickness bands within cold-rolled category.
If width under 600 mm
Narrower stainless steel coils fall under Chapter 72 heading 7220 for widths less than 600 mm.
If subjected to further working like polishing
Any surface treatment beyond cold-rolling (e.g., polishing per Chapter notes) moves product to 'further worked' provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact thickness under 0.5 mm and cold-rolled status via mill test reports to avoid reclassification to thicker gauges
• Provide chemical composition analysis confirming standard 304 grade (not razor blade or tool steel) to qualify under 'Other' subheading
• Ensure coils are free of further workings like polishing or coating per Chapter 72 notes, or risk duty under 7219.90
Related Products under HTS 7219.35.00.35
316L Stainless Steel Cold-Reduced Coil 0.45mm x 1500mm
Cold-reduced 316L stainless steel coil, 0.45 mm thick and 1500 mm wide, in coil form for corrosion-resistant applications. Fits HTS 7219.35.0035 as 'Other' flat-rolled stainless steel, cold-rolled, under 0.5 mm, in coils, excluding special alloys. Commonly used in pharmaceutical equipment and marine hardware.
430 Stainless Steel Cold-Rolled Coil 0.3mm x 1250mm
Ferritic 430 grade stainless steel cold-rolled into 0.3 mm thick coils, 1250 mm wide, for automotive trim and appliances. HTS 7219.35.0035 applies to this not-further-worked, thin cold-rolled stainless product in coils, outside specialized categories.
201 Stainless Steel Cold-Rolled Coil 0.41mm x 1219mm
Austenitic 201 grade cold-rolled stainless coil at 0.41 mm thickness, 1219 mm width, in coils for construction and utensils. Classifies in HTS 7219.35.0035 as other thin cold-rolled stainless steel coils not further worked.
409 Stainless Steel Cold-Reduced Coil 0.35mm x 1500mm
Ferritic 409 stainless steel cold-reduced to 0.35 mm thick, 1500 mm wide coils for exhaust systems and appliances. HTS 7219.35.0035 covers this as other cold-rolled stainless, under 0.5 mm, in coils, without further working.
304 Cold-Rolled Stainless Shim Stock Coil 0.2mm x 1000mm
Ultra-thin 0.2 mm 304 stainless cold-rolled coil used as shim stock, 1000 mm wide, in coil form. Perfectly matches HTS 7219.35.0035 for thin, not further worked cold-rolled stainless steel coils exceeding 600 mm width.
439 Stainless Steel Cold-Rolled Coil 0.38mm x 1220mm
High-temperature 439 ferritic stainless cold-rolled to 0.38 mm, 1220 mm wide coils for mufflers. Classifies HTS 7219.35.0035: thin cold-rolled stainless in coils, other category.