Ferritic 409 Stainless Steel Coil
Cold-reduced coil of Grade 409 ferritic stainless steel, thickness under 0.5 mm, width over 600 mm, with chromium content under 15% by weight per HTS specification. Not further worked, suitable for exhaust systems and mufflers in automotive manufacturing. Meets Chapter 72 definitions for cold-rolled flat-rolled stainless products.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing 15% or more chromium
Higher chromium content (≥15%) cold-rolled coils are classified in the parallel 'Other' subheading 7219.35.0050.
If further fabricated into pipe/tube
Products made up into tubes or pipes from this steel shift to Chapter 73 heading for steel tubes.
If subjected to further working like coating
Any polishing, coating, or cladding per Chapter 72 note moves it to 'further worked' category in 7219.90.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact alloy grade and chromium percentage at entry; Type 409 typically 10.5-11.75% Cr qualifies under this subheading
• Avoid common error of declaring as 'further worked' if only cold-rolled—check for any coatings which would shift to 7219.90
• Include dimensional specs (thickness gauge reports) to confirm <0.5 mm and coil form
Related Products under HTS 7219.35.00.30
Appliance Grade 441 Stainless Coil
Thin cold-rolled coil (thickness <0.5 mm, width ≥600 mm) of Type 441 ferritic stainless steel with <15% chromium by weight. Not further worked, used for dishwasher linings, oven trim, and washing machine components. Fits HTS 7219.35.0030 for cold-reduced stainless coils.
Decorative Fascia Stainless Coil
Ultra-thin cold-rolled stainless coil (<0.5 mm thick, ≥600 mm wide) with <15% Cr, for manufacturing decorative fascia panels in home appliances. In coils, cold-reduced only, no further treatments. Matches HTS 7219.35.0030 for thin stainless flat-rolled products.
Exhaust Shield 409CB Stainless Coil
Cold-rolled coil of 409CB stabilized ferritic stainless, under 0.5 mm thickness, 600+ mm width, <15% Cr by weight. For heat shields in vehicle exhaust systems. HTS 7219.35.0030 applies to this not-further-worked cold-reduced stainless product.
Low Cr 3CR12 Stainless Coil
Proprietary 3CR12 utility stainless steel cold-rolled coil (<0.5 mm, >600 mm width, certified <15% Cr). In coils, cold-reduced only, for structural cladding and tanks. Fits precise HTS criteria for thin low-chromium stainless flat products.
HVAC Duct Liner Stainless Coil
Thin-gauge cold-rolled stainless coil (<0.5 mm thick, 600 mm+ width) <15% Cr, for HVAC duct liners and ventilation components. Not further worked, in coil form per HTS 7219.35.0030 for cold-reduced stainless flat-rolled products.
Type 434 Ferritic Stainless Coil
Cold-rolled Type 434 ferritic stainless steel coil, thickness under 0.5 mm, width 600 mm or more, <15% Cr certified. Contains molybdenum for better corrosion resistance, used in trim and wheel covers. HTS 7219.35.0030 for thin cold-reduced low-Cr stainless.