Type 316 Stainless Steel Cold-Rolled Coil 0.6mm
Type 316 austenitic stainless steel coil with 16-18% chromium, 10-14% nickel, and 2-3% molybdenum for corrosion resistance, cold-rolled to 0.6 mm thickness in coils over 600 mm wide. Fits HTS 7219.34.0025 as cold-reduced, not further worked, with high nickel content. Ideal for marine and chemical processing applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled instead of cold-rolled
Hot-rolled stainless coils of similar specs fall under preceding cold/hot-rolled distinction in heading 7219.
If thickness over 1 mm
Thicker cold-rolled stainless steel coils (>1 mm) are classified in the next thickness subheading.
If alloyed as tool steel per note (e)
Specific high-carbon/chromium tool steel compositions redirect to Chapter 72 tool steel provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis reports verifying molybdenum addition and nickel levels exceeding 0.5% by weight
• Avoid common pitfall of declaring polished or coated material here—such 'further worked' products move to 7222.xx
• Use precise gauge measurements; customs may test thickness to confirm 0.5-1 mm range
Related Products under HTS 7219.34.00.25
Type 304 Stainless Steel Cold-Rolled Coil 0.8mm Thick
Cold-rolled stainless steel coil of Type 304 grade, featuring 18% chromium and 8-10.5% nickel content, with thickness of 0.8 mm and width exceeding 600 mm. Classified under HTS 7219.34.0025 due to its cold-rolled state (not further worked), nickel content over 0.5%, and specific thickness range in coils. Commonly used for kitchen equipment and architectural panels.
Type 321 Stainless Steel Cold-Reduced Coil 0.9mm Thick
Cold-reduced Type 321 stainless steel coil stabilized with titanium, containing 17-19% chromium and over 9% nickel, 0.9 mm thick, width 600 mm+. Meets HTS 7219.34.0025 criteria for cold-rolled, high-nickel, non-further-worked stainless in coils. Used in high-temperature exhaust systems.
17-4PH Precipitation Hardening Stainless Coil 0.7mm
17-4PH martensitic precipitation hardening stainless steel cold-rolled coil with approximately 4% copper, 15-17.5% chromium, and 3-5% nickel, 0.7 mm thick in wide coils. Classified in HTS 7219.34.0025 for its cold-rolled, nickel-bearing (>0.5%) stainless properties, not further worked. Suited for aerospace components.
Type 310 Cold-Rolled Stainless Steel Coil 1mm Thick
High-temperature Type 310 stainless coil with 24-26% chromium and 19-22% nickel, cold-rolled to exactly 1 mm thickness, coils over 600 mm wide. HTS 7219.34.0025 applies to this not-further-worked, high-nickel cold-reduced stainless product. Used in furnace parts and heat exchangers.
Type 904L Super Austenitic Stainless Coil 0.75mm
Type 904L super-austenitic stainless cold-rolled coil with 19-23% Cr, 23-28% Ni, 4-5% Mo, 0.75 mm thick, wide format. HTS 7219.34.0025 for high-nickel cold-reduced stainless, no further working. Premium corrosion resistance for pharma/chemical uses.
Duplex 2205 Stainless Steel Cold Coil 0.55mm
Duplex 2205 (UNS S31803) stainless steel cold-rolled coil with 22% Cr, 5-6% Ni, 3% Mo for superior strength/corrosion resistance, 0.55 mm thick wide coils. Fits HTS 7219.34.0025 as cold-rolled stainless >0.5% Ni, not further worked. Applied in oil/gas piping.