Custom 1.4003 Stainless Cold-Rolled Coil
EN 1.4003 (410 equivalent) cold-rolled stainless steel coil, 1.2 mm thick, 1400 mm width, 11-13% Cr content under 15% weight limit, in coils. Meets all criteria for HTS 7219.33.0042: stainless, cold-reduced, 1-3 mm, wide, low Cr. Common in architectural panels.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If higher chromium variants
Grade variants exceeding 15% Cr total classify in 'other' chromium category
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Reference European grade equivalents in documentation; measure width precisely (must ≥600 mm); test for 'further worked' surface conditions
Related Products under HTS 7219.33.00.42
AISI 430 Cold-Rolled Stainless Steel Coil
Flat-rolled stainless steel coil made from AISI 430 grade with approximately 16-18% chromium but certified as containing less than 15% by weight total chromium per U.S. note definitions, cold-rolled to a thickness of 1.5 mm, width 1250 mm, supplied in coils. This product falls under HTS 7219.33.0042 as cold-reduced stainless steel not further worked, exceeding 1 mm but less than 3 mm thick, in coils, with low chromium content. Commonly used for automotive trim and appliance exteriors.
Ferritic 409 Stainless Steel Cold-Reduced Coil
Cold-rolled coil of grade 409 ferritic stainless steel, thickness 2.2 mm, width 1500 mm, containing 10.5-11.75% chromium (less than 15% total), not further worked beyond cold reduction, in coil form. Classified under HTS 7219.33.0042 for cold-rolled stainless steel coils 1-3 mm thick with low chromium. Used primarily in automotive exhaust systems.
11% Chromium Cold-Rolled Stainless Coil 2mm
Cold-reduced stainless steel coil with precisely 11% chromium content by weight, 2.0 mm thickness, 1000 mm width, in coils, not further worked. Meets HTS 7219.33.0042 criteria for cold-rolled stainless flat products 1-3 mm thick, ≥600 mm wide, low chromium, in coils. Applied in washing machine drums and HVAC components.
Low Chromium 410S Cold-Rolled Steel Coil
Grade 410S stainless steel cold-rolled coil with 11.5-13.5% chromium (under 15% total weight), 1.8 mm thick, 1200 mm width, supplied in coils without additional processing. Fits HTS 7219.33.0042 as cold-reduced stainless steel, thickness 1-3 mm, low Cr content. Ideal for heat exchanger components.
Martensitic 420 Low Cr Cold Coil 2.5mm
Cold-rolled martensitic grade 420 stainless coil formulated to 12-14% chromium (less than 15%), 2.5 mm thickness, 800 mm width, in coil form, not further worked. Classified in HTS 7219.33.0042 for its cold-reduced state, intermediate thickness, and low chromium profile. Used in cutlery blanks and pump shafts.
Automotive Grade 429 Cold Coil 1.7mm
AISI 429 cold-rolled stainless coil for automotive use, 14% chromium (below 15%), 1.7 mm gauge, 1100 mm wide, coil packed. HTS 7219.33.0042 applies to this cold-reduced, intermediate thickness, low Cr stainless product. Specified for exhaust heat shields.