AISI 321 Cold-Rolled Stainless Steel Coil
AISI 321 stabilized stainless steel coil with 9-12% nickel, 17-19% chromium, titanium-stabilized, 1.2 mm thick cold-rolled, coil width 1500 mm. HTS 7219.33.0038 for cold-rolled stainless >1<3mm, nickel-bearing, other. Heat-resistant applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If burnished or artificial oxidation applied
Surface treatments listed in Chapter 72 'further worked' note move product to 7219.34.
If meeting heat-resisting steel definition
Specific low-carbon, 4-10.5% Cr alloys per note (g) classify as heat-resisting steel in 7225.
If processed into welded pipes
Finished welded stainless pipes from this material classify in Chapter 73 heading 7306.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify Ti stabilization and Ni content; inspect for mill edge condition; declare as 'not further worked' explicitly on entry docs
Related Products under HTS 7219.33.00.38
AISI 304 Cold-Rolled Stainless Steel Coil
AISI 304 stainless steel coil, cold-rolled to a thickness of 1.5 mm and width over 600 mm, containing 8-10.5% nickel and 18-20% chromium. Classified under HTS 7219.33.0038 as flat-rolled stainless steel not further worked than cold-rolled, in coils, thickness 1-3 mm, with >0.5% nickel. Meets Chapter 72 definitions for stainless steel alloy.
AISI 316L Cold-Rolled Stainless Steel Coil
Low-carbon AISI 316L stainless steel coil with 10-14% nickel, 16-18% chromium, and 2-3% molybdenum, cold-rolled to 2 mm thickness in coils wider than 600 mm. Fits HTS 7219.33.0038 for cold-rolled stainless steel >1mm <3mm thick, >0.5% nickel, not further worked. Ideal for marine and chemical applications.
17-4 PH Precipitation Hardening Stainless Steel Coil
17-4 PH (UNS S17400) stainless steel coil with ~4% nickel, 17% chromium, cold-rolled to 1.8 mm thickness, width 1,200 mm in coil form. HTS 7219.33.0038 applies as cold-rolled stainless >1<3mm, >0.5% Ni, other category. Used in aerospace components.
Duplex 2205 Cold-Rolled Stainless Steel Coil
Duplex 2205 (UNS S32205) stainless steel with 5.5-6.5% nickel, 22% chromium, 3% molybdenum, cold-rolled 2.2 mm thick coils over 600 mm wide. Classifies in HTS 7219.33.0038 as other cold-rolled stainless steel in coils, thickness 1-3 mm, >0.5% Ni. High strength for oil & gas.
Nitronic 50 Cold-Rolled Stainless Steel Coil
Nitronic 50 (XM-19) austenitic stainless coil with 12% nickel, 21% chromium, 8% manganese, cold-rolled to 2.5 mm, wide coils. Under HTS 7219.33.0038 as other cold-rolled stainless steel 1-3 mm thick, >0.5% Ni, not further worked. High strength, wear-resistant.
AISI 310 Cold-Rolled Stainless Steel Coil
AISI 310 heat-resistant stainless steel coil, 19-22% nickel, 24-26% chromium, cold-rolled 1.7 mm thickness, coils over 600 mm wide. HTS 7219.33.0038 classification for cold-rolled stainless, 1-3 mm thick, high nickel content, other category.