Type 317L Stainless Steel Cold-Rolled Coil
Standard Type 317L cold-rolled coil, 1.9 mm gauge, 1,050 mm wide, 3.0% molybdenum, 11.5% nickel for flue gas desulfurization. HTS 7219.33.0036 classification for thickness, form, and alloy specs. Enhanced molybdenum over 316L.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of 304/304L composition
Lower alloy content (no Mo specification) uses different stainless subheadings.
If after bright annealing
Heat treatment may constitute further working per Chapter definition.
If high-strength steel per note (a)
Yield strength specs meeting high-strength definition override standard stainless.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Lower carbon cert (<0.03%) distinguishes L-grade; mill edge vs slit edge affects yield; HTS binding ruling recommended for volume imports
Related Products under HTS 7219.33.00.36
254 SMO Cold-Rolled Stainless Steel Coil
1.7 mm thick, 850 mm wide 254 SMO super stainless cold-rolled coil with 2.7% molybdenum, 18% nickel for offshore platforms. HTS 7219.33.0036 for cold-rolled coils >600mm wide, 1-3mm thick, specific alloy content. High pitting resistance.
XM-27 UNS S31277 Stainless Steel Coil
Cold-rolled XM-27 coil 2.5 mm thick, 950 mm wide, 2.9% Mo, 19.5% Ni for sour gas service. Precisely matches HTS 7219.33.0036 as stainless, cold-rolled coil not further worked. Balances strength and corrosion resistance.
N08367 Cold-Rolled Stainless Steel Coil
N08367 alloy cold-rolled coil 2.1 mm thick, 700 mm wide, 2.4% Mo, 23% Ni for chemical tanks. Fits HTS 7219.33.0036 as cold-reduced stainless coil with required elements, width over 600 mm. High performance austenitic grade.
1.4462 (329) Duplex Stainless Steel Coil
1.4462 duplex stainless cold-rolled coil, 2.4 mm, 1,200 mm wide, 2.6% Mo, 1.5% Ni meeting threshold for oil & gas. HTS 7219.33.0036 despite duplex structure due to composition specs and form. Combines austenitic/ferritic properties.
Type 904L Super Austenitic Stainless Steel Coil
2 mm thick cold-rolled Type 904L coil, 1,100 mm width, featuring 4.2% molybdenum and 25% nickel for pharmaceutical equipment. Meets HTS 7219.33.0036 criteria for stainless steel coils not further worked, with Mo 1.5-5% and Ni >0.5%. Exceptional corrosion resistance.
Type 316L Stainless Steel Cold-Rolled Coil
Cold-rolled stainless steel coil of 2 mm thickness and 1,200 mm width, containing 2.2% molybdenum and 10.5% nickel for enhanced corrosion resistance. Classified under HTS 7219.33.0036 due to its composition exceeding 0.5% nickel and 1.5-5% molybdenum, cold-rolled state, and specific dimensions in coils. Used in chemical processing equipment.