Type 316L Cold-Rolled Stainless Steel Coil
Wide cold-rolled stainless steel coil (1.37m+ width, 1-3mm thick) made from Type 316L alloy containing 10-14% nickel and 2-3% molybdenum for superior corrosion resistance. Classified under HTS 7219.33.0020 due to its nickel content exceeding 0.5%, cold-rolled finish without further surface treatments, and specific dimensions in coils. Commonly used in chemical processing equipment and marine applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If nickel content ≤0.5% (e.g., Type 304)
Lower nickel alloys like standard austenitic 304 stainless shift to the 'not containing >0.5% nickel' subheading.
If width <600mm
Narrower flat-rolled stainless products fall under Chapter 72 heading 7220 for widths under 600mm.
If thickness ≤1mm
Thinner cold-rolled sheets/coils are classified separately based on thickness exceeding 1mm threshold.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide mill test certificates verifying nickel content >0.5% and exact alloy composition to avoid reclassification
• Ensure dimensional compliance (width ≥1370mm, thickness 1-3mm) with precise measurements documented
• Avoid claims for rust/discoloration allowances per Chapter 72 notes; inspect coils pre-entry
Related Products under HTS 7219.33.00.20
Type 317 Cold-Rolled Stainless Steel Coil
Cold-rolled Type 317 stainless steel coil with width over 1370mm and thickness 1-3mm, featuring 11-15% nickel for enhanced pitting resistance. Falls under HTS 7219.33.0020 as a not-further-worked product with high nickel content per Chapter 72 definitions. Ideal for pharmaceutical and food processing industries requiring high purity.
Duplex 2205 Cold-Rolled Stainless Steel Coil
UNS S31803/S32205 duplex stainless steel cold-rolled coil, 1370mm+ wide, 1-3mm thick, with 4.5-6.5% nickel and high chromium/molybdenum for strength and corrosion resistance. HTS 7219.33.0020 applies due to nickel >0.5%, cold-rolled state, and coil form without further working. Used in oil & gas and structural applications.
Type 310 Cold-Rolled Stainless Steel Coil
High-temperature Type 310 stainless steel cold-rolled coil (>1370mm wide, 1-3mm thick) with 19-22% nickel and 24-26% chromium for oxidation resistance. Classified in HTS 7219.33.0020 for its elevated nickel content, cold-reduction process, and uncoated coil form. Suited for furnace parts and heat exchangers.
Type 904L Cold-Rolled Stainless Steel Coil
Premium Type 904L (UNS N08904) cold-rolled stainless coil, 1370mm+ width, 1-3mm thickness, alloyed with 23-28% nickel, copper, and molybdenum for extreme corrosion resistance. HTS 7219.33.0020 due to nickel content >0.5%, not further worked beyond cold-rolling, in coils. Used in luxury watchmaking and chemical tanks.