11% Chromium Stainless Steel Cold Coil
Flat-rolled stainless steel coil with exactly 11% chromium by weight, cold-rolled to 3.2 mm thickness, 1,200 mm wide, in coiled form for heavy machinery components. No further working applied. Fits HTS 7219.32.0042 precisely due to chromium level, thickness, width, and processing state.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If alloy qualifies as tool steel per US Note (e)
Tool steels with specific Cr/C combos classify under heading 7222 regardless of stainless designation.
If of thickness under 3 mm
Thinner cold-rolled stainless coils fall into the lower thickness band within the same cold-rolled series.
If imported as tubes made from this material
Fabricated into stainless steel pipes/tubes shifts to Chapter 73 tubing headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit weight percentage lab certification for chromium; slight overages trigger reclassification to 7219.31
• Confirm 'in coils' status—slit or cut-to-length sheets may require 7219.34 or hot-rolled codes
• Label with exact HTS for CBP; generic 'stainless steel' invites scrutiny under Chapter 72 verification
Related Products under HTS 7219.32.00.42
AISI 410 Cold-Rolled Stainless Steel Coil
Cold-rolled stainless steel coil made from AISI 410 grade with approximately 11.5-13.5% chromium content, thickness between 3-4.5 mm, and width over 600 mm. This product is not further worked beyond cold-rolling and is supplied in coils for applications like automotive exhaust systems. It falls under HTS 7219.32.0042 due to its low chromium content (less than 15%), cold-rolled state, specified thickness range, and coil form.
Martensitic 420 Stainless Steel Coil
Cold-reduced coil of AISI 420 martensitic stainless steel containing 12-14% chromium, 3.5-4.5 mm thick, over 600 mm wide, in coil form without additional surface treatments. Used in cutlery blanks and pump shafts. Classified under 7219.32.0042 for its sub-15% chromium, cold-rolled, intermediate thickness, and coil characteristics.
Low Chrome 13-8Mo Stainless Coil
Cold-rolled stainless steel coil with 13% Cr and 8% Mo alloying, 4 mm thick, 800 mm wide, coiled for valve manufacturing. Lacks further surface treatments. HTS 7219.32.0042 applies for <15% Cr, cold-reduced, 3-4.75 mm thickness, wide coil format.
AISI 416 Cold-Reduced Steel Coil
AISI 416 free-machining stainless steel coil, 12.5% Cr with sulfur addition, cold-rolled to 3.8 mm x 700 mm wide, in coils for screw production. Not further worked. Matches 7219.32.0042 criteria: low Cr, thickness range, coil form, cold-rolled.
12% Chromium Cold Coil for Blades
Cold-rolled stainless coil with 12% Cr, 3.5 mm thick, 900 mm wide for shear blade stock, supplied in coils without polishing. Classed in 7219.32.0042 for chromium content under 15%, cold-reduced state, and dimensions.
Ferritic 430F Stainless Steel Coil
Ferritic AISI 430F stainless with 12-14% Cr and sulfur, cold-rolled 4.2 mm thick x 650 mm wide coil for machining stock. No additional treatments. HTS 7219.32.0042 due to <15% Cr, cold-rolled, coil, thickness specs.