Incoloy 825 Cold-Rolled Coil
Flat-rolled Incoloy 825 stainless steel coil, cold-rolled to a thickness of 3.5 mm and width over 600 mm, classified under HTS 7219.32.0035 due to its high-nickel alloy composition (over 38% nickel) and not further worked beyond cold-rolling. Used in chemical processing equipment for corrosion resistance. Meets the criteria for high-nickel alloy steel in Chapter 72 notes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with surface treatment like polishing
Cold-rolled products subjected to polishing or coating fall under heading 7220 as 'further worked' per Chapter 72 notes.
If thickness under 3 mm
Thinner cold-rolled high-nickel alloy steel shifts to the subheading for less than 3 mm thickness.
If not in coils
Flat-rolled products of same specs but not in coils classify under the non-coil subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact nickel content exceeding 25% with mill test reports to confirm high-nickel alloy classification; ensure thickness measurement between 3-4.75mm to avoid reclassification; declare as 'not further worked' with no evidence of polishing or coating
Related Products under HTS 7219.32.00.35
Hastelloy C-276 Cold-Rolled Coil
Cold-rolled Hastelloy C-276 coil with 3.2 mm thickness and 1500 mm width, a high-nickel (57% Ni) alloy steel for extreme corrosion environments like flue gas desulfurization. Falls under HTS 7219.32.0035 as flat-rolled stainless steel, cold-reduced only, in coils. High nickel content defines it per U.S. notes.
Alloy 20 Cold-Rolled Stainless Coil
Cold-rolled Alloy 20 (UNS N08020) stainless steel coil, 3.8 mm thick, 1200 mm wide, containing 32-38% nickel for sulfuric acid resistance. Classified in HTS 7219.32.0035 for high-nickel alloy steel, flat-rolled, cold-reduced, in coils, width 600 mm+. Ideal for pharmaceutical and food processing.
Monel 400 Cold-Rolled Coil
Monel 400 (UNS N04400) high-nickel (67% Ni) alloy steel, cold-rolled to 3.4 mm thickness in 1000 mm wide coils for marine and chemical applications. HTS 7219.32.0035 applies as stainless steel flat-rolled product, cold-reduced, not further worked, high-nickel alloy specific.
Inconel 625 Cold-Rolled Coil
Inconel 625 (UNS N06625) superalloy coil, cold-rolled 3.6 mm thick, 1400 mm wide, with 58% nickel for aerospace and nuclear uses. Fits HTS 7219.32.0035: stainless steel, cold-rolled coils, 3-4.75 mm, high-nickel alloy steel.
Custom 825 High-Nickel Coil
Custom 825 variant cold-rolled stainless coil, 3.1 mm thick, 800 mm wide, high-nickel for oil & gas sour service. HTS 7219.32.0035 for cold-rolled, coiled, high-nickel alloy flat-rolled stainless steel 3 mm+ but <4.75 mm.
Ni-Span C Cold-Rolled Alloy Coil
Ni-Span C (UNS N09902) high-nickel precision alloy coil, cold-rolled 3.9 mm, for temperature-stable springs. Classed under HTS 7219.32.0035 as high-nickel stainless, cold-reduced coil form.