317L High-Nickel Stainless Steel Cold-Reduced Coil
Cold-reduced 317L stainless steel coil with 11-14% nickel content, 3.8 mm thick, and 1524 mm width, supplied in coil form without further surface treatments. Classifies under HTS 7219.32.0020 for its elevated nickel alloy composition in the specified thickness range, wide coil format. Ideal for pulp and paper industry applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width 600-1370 mm
Narrower coil width within the same thickness and nickel specs moves to the preceding width subheading.
If hot-rolled rather than cold-rolled
Processing method determines heading - hot-rolled stainless steel coils classify under 7219.22 regardless of nickel.
If made from tool steel alloy per Chapter Note (e)
Specific tool steel compositions containing defined chromium/carbon levels shift to Chapter 72 heading 7222.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis reports proving nickel exceeds 0.5% per U.S
• Chapter 72 note definitions
• Confirm no 'further worked' treatments like polishing occurred post-cold-rolling
• Watch for thickness measurement disputes - use calibrated tools matching CBP standards
Related Products under HTS 7219.32.00.20
Type 304L Nickel-Bearing Stainless Steel Cold-Rolled Coil
Flat-rolled stainless steel coil of Type 304L grade, containing approximately 10-12% nickel by weight, cold-rolled to a thickness of 3.5 mm and width exceeding 1370 mm. This product is not further worked beyond cold-rolling and falls under HTS 7219.32.0020 due to its nickel content exceeding 0.5%, specific thickness range, coil form, and width. Commonly used in chemical processing equipment requiring corrosion resistance.
Type 316Ti Nickel-Stabilized Stainless Steel Coil
Type 316Ti stainless steel flat-rolled coil with 10-14% nickel and titanium stabilization, cold-rolled to 4.2 mm thickness and 1400 mm width. Meets HTS 7219.32.0020 criteria as nickel-bearing (>0.5%), cold-reduced product in wide coil form within 3-4.75 mm thickness. Used in heat exchanger manufacturing.
321 Stabilized Nickel Stainless Steel Cold Coil
Austenitic Type 321 stainless steel coil containing 9-12% nickel, cold-rolled to 3.2 mm thickness with 1550 mm width, not further worked. Falls under HTS 7219.32.0020 for nickel content, precise thickness bracket, coil form, and wide dimension. Applied in aircraft exhaust systems.
310S Heat-Resistant Nickel Stainless Coil
Type 310S high-temperature stainless steel cold-rolled coil with 19-22% nickel content, 3.9 mm thick, 1420 mm wide, in coil form without additional processing. Classified in HTS 7219.32.0020 due to substantial nickel alloying, thickness specs, and wide cold-reduced format. Used for furnace components.