Incoloy 825 Cold-Rolled Coil
Flat-rolled Incoloy 825 stainless steel coil, high-nickel alloy with over 38% nickel, cold-rolled to 3.5 mm thickness and 1500 mm width. Classifies under HTS 7219.32.0005 as cold-rolled high-nickel alloy steel coil wider than 1370 mm and 3-4.75 mm thick, not further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled instead of cold-rolled
Hot-rolled high-nickel alloy steel in same dimensions falls under 7219.31, before cold-reduction.
If width under 600 mm
High-nickel alloy steel coils narrower than 600 mm classify in Chapter 72 heading 7220 for narrower stainless products.
If thickness under 3 mm
Thinner cold-rolled high-nickel coils shift to 7219.33 thickness subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate confirming high-nickel alloy composition (Ni > 30%) to avoid reclassification
• Ensure exact thickness measurement between 3-4.75 mm; CBP may inspect coils directly
• Declare as 'not further worked' - any polishing or coating shifts to 7219.12 or 7219.90
Related Products under HTS 7219.32.00.05
Hastelloy C-276 Cold-Rolled Coil
Hastelloy C-276 nickel-molybdenum-chromium alloy steel coil, cold-rolled to 4.2 mm thick x 1400 mm wide, containing 57% nickel. Fits HTS 7219.32.0005 for high-nickel stainless steel, cold-rolled, coil form, specified width and thickness.
Inconel 625 Cold-Rolled Steel Coil
Inconel 625 superalloy stainless steel coil with 58% nickel content, cold-reduced to 3.8 mm thickness, 1600 mm width in coil form. Precisely matches HTS 7219.32.0005 criteria for high-nickel alloy, cold-rolled stainless coil specs.
Alloy 20Cb-3 Cold-Rolled Coil
Carbide 20Cb-3 (Alloy 20) stainless steel coil, high-nickel (32-38%) with molybdenum, cold-rolled 3.2 mm x 1380 mm wide. HTS 7219.32.0005 covers this exact cold-rolled high-nickel stainless coil configuration.
Monel 400 Cold-Rolled Stainless Coil
Monel 400 nickel-copper alloy steel coil (67% nickel), cold-rolled to 4.0 mm thickness, 1520 mm width for marine/chemical applications. Classifies in HTS 7219.32.0005 as qualifying high-nickel alloy stainless, cold-rolled coil specs.
Custom 825 High-Nickel Coil
Custom 825 equivalent high-nickel stainless steel cold-rolled coil, 3.6 mm thick x 1450 mm wide, for heat exchanger fabrication. HTS 7219.32.0005 specifically for these wide, medium-thick cold-rolled high-nickel alloy coils.