Hot-Rolled Duplex 2205 Stainless Plate 4.75mm Thick
Duplex 2205 stainless steel (UNS S31803) with 4.5-6.5% nickel, 22% chromium, 3% molybdenum, exactly 4.75 mm thick, 1000 mm wide. Hot-rolled only, no further treatments, fits HTS 7219.22.00.35 specs perfectly. Used in oil & gas piping.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If clad or further worked
Any cladding or enameling is 'further worked' to 7219.24 per notes.
If non-alloy but similar thickness
Plain carbon steel flat-rolled falls under 7209, material composition change.
If cold-rolled equivalent
Cold-rolling process reclassifies to 7219.31 series.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify duplex microstructure via certification, but classification based on chemistry and form
• Confirm not in coils; coiled hot-rolled under different 7219.11 subheading
Related Products under HTS 7219.22.00.35
Hot-Rolled 316 Stainless Steel Sheet 8mm Thick
A 316 grade stainless steel flat-rolled product with 10-14% nickel, 16-18% chromium, and 2-3% molybdenum, thickness 8 mm, width 1200 mm. Hot-rolled only, no coils or further working, classified under HTS 7219.22.00.35 for its nickel content, width ≤1575 mm, and thickness range. Ideal for marine and pharmaceutical applications.
Hot-Rolled 310 Stainless Steel Sheet 7mm Thick
High-temperature 310 grade stainless with 19-22% nickel and 24-26% chromium, 7 mm thickness, 1300 mm width. Hot-rolled, no coils or additional processing, under HTS 7219.22.00.35 for >0.5% Ni and dimensional specs. Suited for furnace parts.
Hot-Rolled 347 Stainless Steel Plate 9.5mm Thick
347 stabilized stainless steel plate with 9-13% nickel, 17-19% chromium, and columbium, 9.5 mm thick, 1550 mm wide. Strictly hot-rolled without further working or coiling, classified in HTS 7219.22.00.35. Applied in aircraft exhausts.
Hot-Rolled 317LMN Stainless Steel Sheet 10mm Thick
317LMN stainless with high 13.5-17.5% nickel for corrosion resistance, 10 mm thick, 1570 mm wide. Not further worked than hot-rolled, not coiled, under HTS 7219.22.00.35 for nickel >0.5% and dimensions. For severe chemical environments.
Hot-Rolled 304 Stainless Steel Plate 6mm Thick
This is a flat-rolled stainless steel plate made from 304 grade alloy, containing approximately 8-10.5% nickel and 18-20% chromium, with a thickness of 6 mm and width of 1500 mm. It is hot-rolled, not further worked beyond that process, and not in coils, fitting HTS 7219.22.00.35 due to its width not exceeding 1575 mm, thickness between 4.75-10 mm, and nickel content over 0.5%. Commonly used in chemical processing equipment.
Hot-Rolled 321 Stainless Steel Plate 5mm Thick
321 stainless steel plate, stabilized with titanium, featuring over 9% nickel and 17-19% chromium, 5 mm thick, 1400 mm wide. Not further worked than hot-rolled, not coiled, matches HTS 7219.22.00.35 precisely for thickness 4.75-10 mm and width constraint. Used in high-temperature exhaust systems.