Type 904L Hot-Rolled Stainless Sheet 1800mm Wide
High alloy 904L stainless (23% Cr, 4.5% Mo, 25% Ni but effective Ni>0.5%), 8mm thick hot-rolled sheet, 1800mm width. Falls under HTS 7219.22.0020 for specified width, hot-rolled condition, and molybdenum content. Used in pharmaceutical processing equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If nickel ≤0.5% despite high molybdenum
Primary classification driven by nickel threshold before Mo specification
If silicon electrical steel composition
Electrical grade steels follow separate Chapter 72 grain-oriented rules
If tool steel alloy per Chapter note (e)
Matches tool steel definitions despite stainless base
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide full alloy analysis despite high Ni (focus on 1.5-5% Mo qualifier); ensure no burnishing/polishing surface treatments; document hot-rolling process origin
Related Products under HTS 7219.22.00.20
Type 316 Hot-Rolled Stainless Steel Plate 1575-1880mm Wide
Hot-rolled stainless steel plate of Type 316 composition with 2-3% molybdenum and 10-14% nickel, thickness 6mm, width 1700mm. Classified under HTS 7219.22.0020 as flat-rolled product not further worked than hot-rolled, in sheet form not in coils, meeting exact alloy specs and dimensional limits. Used primarily for chemical processing equipment due to superior corrosion resistance.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5mm thick, 1650mm wide, with 2.5% molybdenum and 11% nickel. Fits HTS 7219.22.0020 due to specific width range, hot-rolled condition without further surface treatment, and alloy composition. Ideal for marine applications requiring weldability and pitting resistance.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum, 12% nickel, 6mm thick, 1750mm width. Meets HTS 7219.22.0020 criteria for nickel-molybdenum stainless, hot-rolled not in coils, precise width specs. Provides enhanced resistance to chloride stress corrosion for pulp/paper industries.
Duplex 2205 Hot-Rolled Stainless Plate 1600mm
UNS S31803 duplex stainless steel plate (22% Cr, 5% Ni, 3% Mo), hot-rolled 7mm thick, 1600mm wide. Classified in HTS 7219.22.0020 for Ni>0.5%, Mo 1.5-5%, width 1575-1880mm, not further worked. Offers high strength for offshore platform construction.
AL-6XN Hot-Rolled Stainless Steel Plate 1720mm
AL-6XN super-austenitic stainless plate with 6% Mo (within 1.5-5% effective), 2.5% Ni, 7mm thick, 1720mm wide, hot-rolled. HTS 7219.22.0020 applies due to precise dimensional and alloy criteria for not-further-worked stainless. Suited for seawater desalination plants.