Hot-Rolled 304 Stainless Steel Coil 3.5mm Thick
Hot-rolled stainless steel coil made from grade 304 alloy, with thickness of 3.5 mm and width exceeding 600 mm, supplied in coiled form without annealing or pickling treatments. Classified under HTS 7219.13.00.02 as flat-rolled stainless steel not further worked than hot-rolled, in coils, 3-4.75 mm thick, and specifically not annealed or pickled. Used primarily for applications requiring subsequent processing like cold rolling or fabrication.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 3 mm
Thinner hot-rolled stainless coils shift to 7219.12, separating by thickness thresholds within hot-rolled category.
If thickness 4.75 mm or more
Thicker hot-rolled stainless coils (4.75mm+) fall under 7219.14, based on precise thickness bands.
If not stainless steel alloy
Non-stainless alloy steel flat-rolled products in coils move to Chapter 72 heading 7220.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify stainless steel composition meets Chapter 72 definitions via mill test certificates to confirm classification
• Ensure coils are measured for exact thickness (3-4.75mm) and width (>600mm) at entry to avoid reclassification
• Declare as 'not annealed or not pickled' explicitly; common pitfall is misstating surface treatment status
Related Products under HTS 7219.13.00.02
Hot-Rolled 316L Stainless Steel Coil 4mm Thick
Grade 316L stainless steel hot-rolled coil, 4 mm thick, width over 600 mm, not annealed or pickled, retaining mill scale surface. Fits HTS 7219.13.00.02 for hot-rolled stainless steel coils of 3 mm or more but less than 4.75 mm thickness, not further worked. Commonly used in chemical processing equipment fabrication.
Hot-Rolled Duplex 2205 Stainless Steel Coil 3.2mm
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 3.2 mm thickness, width 800 mm or more, not subjected to annealing or pickling. Matches HTS 7219.13.00.02 criteria for stainless steel flat-rolled products hot-rolled in coils, 3-4.75 mm thick, without those treatments. Ideal for offshore platforms and pressure vessels.
Hot-Rolled 321 Stainless Steel Coil 4.2mm
Titanium-stabilized 321 stainless steel hot-rolled coil, 4.2 mm thickness, coil width 1000 mm+, untreated by annealing or pickling. Directly corresponds to HTS 7219.13.00.02 for hot-rolled stainless flat products in coils, 3-4.75 mm thick, not annealed/pickled. Used in exhaust systems and heat exchangers.
Hot-Rolled 310 Stainless Steel Coil 3.7mm Thick
High-temperature 310 grade stainless steel hot-rolled coil, 3.7 mm thick, wide format over 600 mm, not annealed or pickled. HTS 7219.13.00.02 applies to this not further worked hot-rolled stainless coil in the specified thickness. For furnace parts and kiln liners.
Hot-Rolled 409 Stainless Steel Coil 3.4mm
Ferritic 409 automotive grade stainless hot-rolled coil, 3.4 mm thick, width 700 mm+, without annealing or pickling. Fits HTS 7219.13.00.02 as stainless steel hot-rolled in coils, thickness 3-4.75 mm, untreated. Primarily for exhaust mufflers.
Hot-Rolled 17-4 PH Stainless Steel Coil 4.5mm
Precipitation-hardening 17-4 PH stainless steel hot-rolled coil, 4.5 mm thick, over 600 mm wide, not annealed/pickled. HTS 7219.13.00.02 for hot-rolled stainless coils in thickness range. Aerospace and valve applications.