904L Super Austenitic Stainless Hot Coil 4.8mm
904L super austenitic stainless hot-rolled coil with 23-28% nickel, extreme corrosion resistance, minimum 4.75mm thickness, coil width >600mm. Precisely HTS 7219.12.0071: hot-rolled not further worked, 4.75-10mm, >0.5% Ni stainless. For pharmaceutical and seawater equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If painted/varnished
Nonmetallic coatings explicitly listed as further worked in chapter notes.
If <600mm width
Width threshold separates wide flat-rolled (7219) from narrow strip (7225).
If finished into valve/turbine parts
Machined into finished machine parts changes to machinery classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Super alloys need full PMI (positive material identification) for customs verification
• Confirm no annealing/pickling post-rolling; counts as further working
• High-value; insure properly and use licensed customs brokers
Related Products under HTS 7219.12.00.71
Duplex 2205 Hot-Rolled Stainless Coil 5mm
Duplex 2205 (UNS S31803) hot-rolled stainless steel coil with ~5% nickel, high strength, and corrosion resistance, thickness 5mm, coil form, width >600mm. Matches HTS 7219.12.0071 criteria for hot-rolled, not further worked, 4.75-10mm thick stainless with >0.5% Ni. Applied in offshore platforms and desalination plants.
321 Hot-Rolled Stainless Steel Coil 7mm Thick
Austenitic 321 stainless steel hot-rolled coil stabilized with titanium, containing 9-12% nickel, 4.75-10mm thickness, wide coil format (>600mm). Classified in HTS 7219.12.0071 as other hot-rolled stainless not further worked with >0.5% Ni. Ideal for high-temperature exhaust systems.
17-4PH Precipitation Hardening Stainless Coil
17-4PH (UNS S17400) martensitic precipitation hardening stainless hot-rolled coil, 4-5% nickel, 6mm thickness, >600mm width. HTS 7219.12.0071 as other hot-rolled stainless coil 4.75-10mm with >0.5% Ni, not further worked. Aerospace and valve applications.
Hot-Rolled 304 Stainless Steel Coil 6mm Thick
A hot-rolled stainless steel coil made from 304 grade alloy, containing approximately 8-10.5% nickel and 18-20% chromium, with thickness of 6mm and width over 600mm. Classified under HTS 7219.12.0071 as a flat-rolled product not further worked than hot-rolled, in coils, 4.75-10mm thick, containing more than 0.5% nickel. Used primarily for industrial fabrication of tanks and pressure vessels.
316L Hot-Rolled Stainless Steel Coil 8mm
Hot-rolled 316L stainless steel coil with 10-14% nickel content, 5mm+ thickness, and width exceeding 600mm, featuring enhanced corrosion resistance due to molybdenum addition. Fits HTS 7219.12.0071 as 'other' hot-rolled stainless coils 4.75-10mm thick with >0.5% Ni, not further worked. Commonly used in chemical processing equipment.
310 Hot-Rolled Stainless Steel Coil 9.5mm
High-temperature 310 stainless steel hot-rolled coil with 19-22% nickel and 24-26% chromium content, 9.5mm thick, width 600mm+, in coil form without further working. HTS 7219.12.0071 covers this as 'other' thick hot-rolled stainless >0.5% Ni. Used in furnace parts and heat exchangers.