Hot-Rolled 316L Stainless Steel Coil 7.5mm Thick 1520mm Wide
A 316L stainless steel hot-rolled coil, 7.5 mm thick and 1520 mm wide, supplied in coil form without further working. Classified under HTS 7219.12.00.21 for stainless flat-rolled products ≥600 mm wide, 4.75-10 mm thick (specifically >6.8 mm in this width bracket), hot-rolled, not in straight lengths.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness not exceeding 4.75 mm
Hot-rolled stainless coils thinner than 4.75 mm in coils shift to lower thickness subheadings under HR 7219.12.
If further worked (e.g., annealed/pickled)
Chapter 72 defines 'further worked' to include annealing or chemical treatments, moving product out of not-further-worked category to 7219.90.
If processed into tubes/pipes
If the coil is formed into seamless stainless tubes during manufacture, classification shifts to Chapter 73 for tubes/pipes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact chemical composition for 316L grade via material test reports to confirm stainless steel status
• Inspect for any discoloration/rust upon entry—no duty allowance per Chapter 72 note
• Use precise gauge measurements as thickness tolerance affects subheading eligibility
Related Products under HTS 7219.12.00.21
Hot-Rolled 304 Stainless Steel Coil 8mm Thick 1500mm Wide
This is a hot-rolled coil of 304 grade stainless steel measuring 8 mm thick and 1500 mm wide, not further worked beyond hot-rolling. It falls under HTS 7219.12.00.21 due to its stainless steel composition, width between 1370-1575 mm, thickness exceeding 6.8 mm but not over 10 mm, and coil form without additional surface treatments like polishing or coating.
Hot-Rolled 310 Stainless Steel Coil 9mm Thick 1550mm Wide
High-temperature resistant 310 grade stainless steel hot-rolled into coils of 9 mm thickness and 1550 mm width, not further worked. Meets HTS 7219.12.00.21 criteria: stainless steel, coil form, width 1370-1575 mm, thickness 4.75-10 mm specifically >6.8 mm, ≥600 mm overall width.
Hot-Rolled Duplex 2205 Stainless Coil 7mm Thick 1480mm Wide
Duplex 2205 (S31803) stainless steel hot-rolled coil at 7 mm thickness and 1480 mm width, not further worked beyond rolling. Fits HTS 7219.12.00.21 as stainless flat-rolled ≥600 mm wide, hot-rolled coils 4.75-10 mm thick in the >6.8 mm/1370-1575 mm width statistical breakout.
Hot-Rolled 304 Stainless Steel Heavy Coil 10mm Thick 1570mm Wide
Maximum thickness 304 stainless steel hot-rolled coil at 10 mm x 1570 mm wide for structural applications, not further worked. Precisely matches HTS 7219.12.00.21: stainless, coils, 600+ mm wide, 4.75-10 mm thick (>6.8 mm in 1370-1575 mm width range).