430 Hot-Rolled Stainless Steel Coil 7mm Thick
Ferritic 430 stainless steel hot-rolled in coils, 7mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components. Meets HTS 7219.12.00.02 as not further worked hot-rolled stainless steel coil in the specified thickness.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled but annealed
Annealing changes surface condition, qualifying as further worked per Chapter notes.
If processed into pipe fittings
Fabricated fittings from this material classify as articles of iron/steel in Chapter 73.
If plated or coated
Metal coating constitutes further working, moving to 7210 even for stainless.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify 16-18% chromium content typical of 430 grade; low nickel distinguishes from austenitics
• Scale residue confirms 'not pickled'; retain production records for potential CBP verification
• Label coils clearly with grade, thickness, and dimensions; incomplete marking leads to exam holds
Related Products under HTS 7219.12.00.02
Hot-Rolled 304 Stainless Steel Coil 6mm Thick
A coil of hot-rolled 304 stainless steel measuring 6mm in thickness and over 600mm wide, not annealed or pickled, used primarily for industrial fabrication. Classified under HTS 7219.12.00.02 as flat-rolled stainless steel not further worked than hot-rolled, in coils, with thickness between 4.75mm and 10mm. The lack of annealing or pickling keeps it in this specific subheading.
Hot-Rolled 316L Stainless Steel Coil 8mm Thick
Heavy-gauge 316L stainless steel hot-rolled coil, 8mm thick and 1500mm wide, featuring scale from hot rolling without annealing or pickling. Falls under HTS 7219.12.00.02 due to stainless steel composition, coil form, specified thickness range, and minimal processing. Ideal for chemical processing equipment.
Duplex 2205 Hot-Rolled Stainless Coil 5mm Thick
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 5mm thick, over 600mm wide, supplied not annealed or pickled for offshore platform fabrication. HTS 7219.12.00.02 applies to this stainless flat-rolled product in coils within the 4.75-10mm thickness range without further working.
321 Hot-Rolled Stainless Steel Coil 4.8mm Thick
Titanium-stabilized 321 stainless steel hot-rolled coil at 4.8mm thickness, not subjected to annealing or pickling, wound in wide coils. Suitable for high-temperature exhaust systems. HTS 7219.12.00.02 covers this exact specification of stainless steel processing and form.
Hot-Rolled 310 Stainless Steel Coil 9.5mm Thick
High-temperature 310 stainless steel (25Cr-20Ni) hot-rolled into 9.5mm thick coils, over 600mm wide, delivered not annealed or pickled. Used in furnace parts. Precisely matches HTS 7219.12.00.02 for thick hot-rolled stainless coils without further working.
17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick
Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5mm thick, wide format without annealing/pickling. Aerospace applications. HTS 7219.12.00.02 due to stainless composition and hot-rolled coil specs.