316L Stainless Steel Strip 0.8mm x 200mm
Hot-rolled 316L stainless steel strip, 0.8mm thickness by 200mm width (width/thickness=250>4), rectangular cross-section. Falls under 7218.91.00.60 as semi-finished stainless steel bars, not square. Ideal for marine applications and chemical processing equipment due to molybdenum content.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-rolled
Cold-formed stainless flat products move to 7219.31, even if dimensions match 7218 criteria.
If width <150mm
Narrower rectangular strips may fall under statistical suffix 7218.91.0030 instead of .0060.
If concrete reinforcing bars per note (c)
Deformed hot-rolled stainless bars for concrete reinforcement classify as finished tubes/pipes in 7304.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include chemical analysis certificate showing 316L composition (16-18% Cr, 10-14% Ni, 2-3% Mo) for CBP verification
• Declare as hot-rolled semi-finished; cold-rolled versions require different HTS in 7219
• Ensure no 'further worked' surface treatments (polishing, coating) per chapter note, or reclassify to 7222.30
Related Products under HTS 7218.91.00.60
304 Stainless Steel Hot-Rolled Strip 1mm x 150mm
Hot-rolled strip of 304 stainless steel with rectangular cross-section, 1mm thick and 150mm wide, meeting the width at least four times thickness criterion (150/1=150>4). Classified under HTS 7218.91.00.60 as a semi-finished stainless steel product, other than square cross-section. Used primarily for further processing into appliances and automotive trim.
430 Stainless Steel Hot Band 2mm x 500mm
Ferritic 430 stainless hot-rolled band/strip, 2mm thick x 500mm wide (ratio=250>4), rectangular profile. HTS 7218.91.00.60 covers this semi-finished form before cold-rolling or slitting. Commonly used for automotive exhaust systems and appliances.
321 Stainless Steel Stabilized Strip 1.5mm x 300mm
Titanium-stabilized 321 stainless hot-rolled strip, 1.5mm x 300mm (ratio=200>4), rectangular. Under 7218.91.00.60 as other semi-finished stainless with sheet-like dimensions. Used in high-temperature exhaust and aircraft components.
409 Stainless Steel Automotive Strip 1.2mm x 1,000mm
Ferritic 409 stainless hot-rolled strip optimized for exhaust systems, 1.2mm thick x 1,000mm wide (ratio>4). Classifies in 7218.91.00.60 for wide rectangular semi-finished stainless products. Lower chromium content makes it cost-effective for automotive use.
17-4 PH Stainless Precipitation Hardening Strip 0.5mm x 180mm
17-4 PH martensitic precipitation hardening stainless hot-rolled strip, 0.5mm x 180mm (ratio=360>4). HTS 7218.91.00.60 for rectangular semi-finished stainless. Aerospace and valve applications leverage its high strength after heat treatment.
310 Stainless Steel High-Temp Strip 3mm x 750mm
Austenitic 310 stainless hot-rolled strip for high-temperature service, 3mm thick x 750mm (ratio=250>4). Under 7218.91.00.60 as semi-finished rectangular stainless product. Furnace parts and heat exchangers use its oxidation resistance.