Multi-Layer Base Metal Plated Steel Micro Wire 0.2mm
Ultra-fine round low-carbon nonalloy steel wire (<0.25% C), multi-layer plated (tin-zinc-nickel) for microelectronics connectors. 0.2 mm enables dense circuit board wiring. HTS 7217.30.4511 for other base metal coatings on <1.0 mm round wire.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If copper dominates
Copper-clad steel may shift if copper imparts essential character.
If pre-drawn rod form
Coiled rods for drawing are 7213; final drawn wire is 7217.
If with thin insulation layer
Even light enamel/varnish makes it insulated wire in Chapter 85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Layer-by-layer plating specs required; total thickness determines 'coating' vs. 'cladding'
• Micro-wire prone to breakage; insure and declare value accurately
• Electronics end-use declaration prevents misclass to textile Chapter 56
Related Products under HTS 7217.30.45.11
Tin-Plated Low-Carbon Steel Welding Wire 0.8mm
Round welding wire made from nonalloy steel containing less than 0.25% carbon, plated with tin for corrosion resistance and smooth feeding in MIG welders. Diameter measures 0.8 mm, suitable for automotive body repairs and thin sheet metal fabrication. Classified under HTS 7217.30.4511 due to its low carbon content, round shape under 1.0 mm, and base metal plating.
Zinc-Coated Low-Carbon Steel Fine Wire 0.6mm
Round iron wire with less than 0.25% carbon, electro-galvanized with zinc for rust protection, used in mesh screens and filters. Diameter of 0.6 mm allows high tensile strength in lightweight applications. Fits HTS 7217.30.4511 as plated round wire under 1.0 mm from nonalloy low-carbon steel.
Nickel-Plated Low-Carbon Steel Binding Wire 0.9mm
Round nonalloy steel wire under 0.25% carbon, nickel-plated for enhanced corrosion resistance in marine binding applications. 0.9 mm diameter ideal for securing cables and light structural ties. HTS 7217.30.4511 covers its plated, round, sub-1.0 mm low-carbon profile.
Tin-Zinc Alloy Plated Steel Piano Wire 0.5mm
Precision round wire of low-carbon nonalloy steel (<0.25% C), coated with tin-zinc alloy for lubricity in musical instrument strings. 0.5 mm diameter provides clear tone in high-pitch applications. Matches HTS 7217.30.4511 for other base metal plated round wire under 1 mm.
Copper-Plated Low-Carbon Steel Magnet Wire 0.7mm
Round nonalloy steel wire with <0.25% carbon, copper-plated for conductivity in electromagnetic coils and relays. 0.7 mm gauge used in small motors and transformers. HTS 7217.30.4511 applies to its base metal plating, low carbon, and sub-1.0 mm diameter.
Terne-Plated Low-Carbon Steel Tinning Wire 0.4mm
Ultra-fine round wire of iron/nonalloy steel (<0.25% C), terne-coated (lead-tin alloy) for solderability in electronics assembly. 0.4 mm diameter for precision tinning operations. Classified in HTS 7217.30.4511 as other base metal plated round wire under 1.0 mm.