Zinc-Coated Low-Carbon Steel Tie Wire
Round zinc-plated nonalloy steel wire, 1.6 mm diameter, under 0.25% carbon, used for securing rebar in construction. Fits HTS 7217.30.30.00 as plated round wire of specified size and low carbon nonalloy steel. Excludes deformations qualifying as reinforcing per U.S. notes.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If diameter under 1.5 mm
Smaller diameter round wire shifts to different subheading within nonalloy steel wire.
If in bars/rods form before drawing
Undrawn hot-rolled forms are classified as bars/rods, not drawn wire.
If imported as woven mesh
Woven into mesh becomes chain link fencing article under Chapter 73.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis report verifying <0.25% carbon to avoid reclassification as higher carbon wire
• Document plating process and weight percentage to confirm 'other base metals' coating
• Check for rust/discoloration; no duty allowance per chapter note on iron/steel damage
Related Products under HTS 7217.30.30.00
Galvanized Low-Carbon Steel Fence Wire
Round wire of nonalloy steel with less than 0.25% carbon, plated with zinc, and diameter of 2.5 mm, used for agricultural fencing. Classified under HTS 7217.30.30.00 due to its round shape, base metal coating, and low carbon content meeting chapter note criteria for nonalloy steel. Not further worked beyond plating.
Tin-Plated Low-Carbon Steel Annealing Wire
Round tin-coated nonalloy steel wire of 2 mm diameter and <0.25% carbon, for annealing processes in metalworking. HTS 7217.30.30.00 applies to its base metal plating, round cross-section, and low-carbon nonalloy composition. Not qualifying as tool steel or other special alloys.
Nickel-Plated Low-Carbon Steel Spring Wire
Round nickel-coated nonalloy steel wire, 1.8 mm diameter, <0.25% carbon, preconditioned for spring forming. Classed in 7217.30.30.00 for plated round low-carbon wire, prior to further fabrication into springs. Distinguishes from heat-resisting or ball-bearing steels.
Terne-Coated Low-Carbon Steel Bale Wire
Round terne (lead-tin)-plated nonalloy steel wire, 1.75 mm dia., <0.25% C, for baling hay and straw. Fits 7217.30.30.00 as other base metal coated round low-carbon wire. Not universal mill plate or high-strength per notes.
Aluminum-Coated Low-Carbon Steel Guy Wire
Round aluminum-plated nonalloy steel wire, 3 mm diameter, <0.25% carbon, for utility pole guy strands. HTS 7217.30.30.00 for plated round wire specs matching low-carbon criteria. Distinguished from concrete reinforcing deformations.
Lead-Coated Low-Carbon Steel Armature Wire
Round lead-plated nonalloy steel wire 1.5 mm dia., <0.25% C, for armature binding in motors. Classed 7217.30.30.00 due to base metal coating on low-carbon round wire. No insulation or further working applied.