Galvanized Steel Fence Wire
Zinc-coated wire of nonalloy steel, typically 12-16 gauge, used for agricultural fencing and boundary enclosures. It falls under HTS 7217.20.75.00 as wire of iron or nonalloy steel plated or coated with zinc, not specifically excluded under other subheadings. The hot-dip galvanization provides corrosion resistance for outdoor applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If twisted into strand or rope configuration
Stranded wire or cable, even if galvanized, classifies under heading 7313 as assemblies rather than single wire.
If not plated or coated with zinc
Uncoated nonalloy steel wire moves to 7217.10 subheading for bare wire of similar diameter and use.
If containing alloying elements exceeding nonalloy thresholds
Alloy steel wire (e.g., with >0.3% Cr or other specified elements) falls under Chapter 72 alloy provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify zinc coating thickness and uniformity via mill test certificates to confirm classification and avoid reclassification as bare wire
• Ensure documentation specifies nonalloy steel composition (<0.25% alloy elements) to prevent shifts to Chapter 72 alloy steel headings
Related Products under HTS 7217.20.75.00
Hot-Dip Galvanized Utility Wire
Thick zinc-coated (hot-dip process) nonalloy steel wire for utility poles, guy wires, and general outdoor stays. Classified in HTS 7217.20.75.00 as other zinc-coated wire not precisely matching gauge-specific codes. Heavy coating (80-120g/m²) ensures longevity.
Zinc-Coated Steel Spring Wire
Patented or drawn zinc-coated nonalloy steel wire for compression/extension springs in machinery. Falls under HTS 7217.20.75.00 as general other coated wire, prior to spring forming. Coating prevents stress corrosion.
Galvanized Steel Lath Wire
Ribbed or plain zinc-coated nonalloy steel wire for plasterboard lath systems in construction. HTS 7217.20.75.00 for other zinc-coated wire used in building interiors. Prevents rust in damp curing conditions.
Zinc-Coated Steel Tying Wire
Galvanized nonalloy steel wire, usually 16-18 gauge in coils, used for tying rebar in construction or baling materials. Classified under HTS 7217.20.75.00 as other zinc-coated wire of iron or nonalloy steel, distinguished from specialized subheadings by general utility. The zinc plating prevents rust during storage and use.
Galvanized Steel Bale Wire
Heavy-duty zinc-coated nonalloy steel wire in straight lengths or coils for securing hay, straw, or scrap metal bales. It matches HTS 7217.20.75.00 as other plated or coated wire, not fitting narrower categories like fine wire or specific gauges. Corrosion protection suits agricultural and recycling uses.
Zinc-Coated Low Carbon Steel Wire
Electro- or hot-dip galvanized wire of low carbon nonalloy steel (C<0.25%), round cross-section over 1.5mm diameter, for general fabrication. HTS 7217.20.75.00 covers this as other zinc-plated nonalloy wire not specified elsewhere. Provides sacrificial corrosion protection.