Heavy Galvanized Flat Tie Wire
Heavy gauge zinc-coated flat wire (1.5mm x 6mm) nonalloy steel for concrete formwork tying and heavy construction bundling. Under HTS 7217.20.15.00 as plated flat wire. Provides superior grip strength over round wire in form ties.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If suitable for concrete reinforcing use
Wire with deformations for rebar tying may qualify under reinforcing bar notes.
If assembled into formwork equipment
Complete construction formwork classifies as fabricated steel structures.
If coated with welding flux instead
Wire for welding electrodes has specialized coatings and classifications.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include break load test results (>1000 kgf typical); verify coating class 60 per ASTM; palletize coils properly to prevent deformation
Related Products under HTS 7217.20.15.00
Galvanized Flat Wire for Filter Media
Fine zinc-coated flat nonalloy steel wire (0.25mm x 1.8mm) for crimped filter media in air handling units and HVAC systems. HTS 7217.20.15.00 for its plated flat wire form. Flat profile maximizes surface area in pleated filter construction.
Zinc-Coated Flat Music Wire Substitute
High-tensile galvanized flat wire (0.4mm x 2mm) nonalloy steel used as economical alternative to music wire in springs and tensioners. HTS 7217.20.15.00 for plated flat profile. Zinc protects against vibration-induced corrosion.
Galvanized Flat Wire for Cable Armor
Profiled zinc-coated flat wire (0.7mm x 3.2mm) nonalloy steel interlocked to form flexible cable armor protection. Classified HTS 7217.20.15.00 as base plated flat wire. Provides mechanical protection with corrosion resistance.
Fine Galvanized Flat Edging Wire
Fine gauge zinc-plated flat wire (0.15mm x 0.8mm) nonalloy steel for decorative metal edging and trim applications. HTS 7217.20.15.00 for narrow plated flat wire. Coating enables bending without cracking.
Structural Galvanized Flat Wire for Reinforcement
Structural-grade zinc-coated flat wire (2mm x 8mm) nonalloy steel for reinforcing composite panels and laminates. Under HTS 7217.20.15.00 as heavy flat plated wire. High strength-to-weight ratio for composites.
Galvanized Steel Flat Wire for Binding Applications
Flat wire of iron or nonalloy steel, plated or coated with zinc, typically 0.5mm thick by 1.5mm wide, used for tying rebar in construction or securing bales. It falls under HTS 7217.20.15.00 as it matches the definition of flat wire which is zinc-coated nonalloy steel wire. The zinc coating provides corrosion resistance essential for outdoor use.