1.0 mm Mild Steel Binding Wire
Uncoated mild steel wire of 1.0 mm diameter, not polished, used primarily for binding rebar in concrete construction. It falls under HTS 7217.10.90.00 as wire of iron or nonalloy steel that is not plated or coated and does not meet specifications for other categories like concrete reinforcing rods with deformations.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing indentations, ribs, or grooves produced during rolling
Deformed bars/rods for concrete reinforcement fall under 7213 per U.S. note (c), changing from plain wire classification.
If made of alloy steel rather than nonalloy
Alloy steel wire (e.g., with added chromium) shifts to Chapter 72 alloy headings like 7229.
If twisted into strand or rope configuration
Stranded wire or cables, even of nonalloy steel, are classified under 7313 as finished wire products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify wire diameter and tensile strength via mill test certificates to confirm nonalloy composition and avoid misclassification as high-strength steel
• Provide documentation proving no plating or coating; common pitfall is residual oils mistaken for coatings
• Declare exact gauge and use; binding wire often scrutinized for rebar rod confusion under note (c)
Related Products under HTS 7217.10.90.00
2.0 mm Galvanized-Free Mild Steel Fence Wire
Plain 2.0 mm diameter nonalloy steel wire without any zinc or other coating, suitable for rural fencing. Classified under HTS 7217.10.90.00 as other not plated or coated wire of iron or nonalloy steel, excluding polished or specific high-strength variants.
0.8 mm Annealed Iron Wire
Soft annealed 0.8 mm pure iron wire, uncoated and not polished, for crafting and light tying applications. Falls under HTS 7217.10.90.00 as nonalloy steel/iron wire excluding coated, plated, or specifically worked types.
1.2 mm Nonalloy Steel Craft Wire
1.2 mm uncoated nonalloy steel wire for jewelry making and crafts, without plating or polish. Precisely fits HTS 7217.10.90.00 as other plain wire not meeting coated/polished or specialty steel definitions.
4.0 mm Unpolished Steel Tying Wire
4.0 mm nonalloy steel wire, unpolished and uncoated, for heavy-duty bundling in shipping. Under HTS 7217.10.90.00 as standard other wire excluding plated, coated, or high-strength types.
0.5 mm Fine Mild Steel Wire
Ultra-fine 0.5 mm mild steel wire, not coated or polished, for electronics winding and filters. HTS 7217.10.90.00 applies to this plain nonalloy wire outside specialty categories.
2.5 mm Black Annealed Binding Wire
2.5 mm black annealed nonalloy steel wire without plating, for construction binding. Fits HTS 7217.10.90.00 as uncoated, non-polished other wire.