With a diameter of less than 1.0 mm
Wire of iron or nonalloy steel: > Not plated or coated, whether or not polished: > Other: > Round wire > Containing by weight 0.6 percent or more of carbon: > Other: > With a diameter of less than 1.0 mm
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7217.10.80.60
0.9mm C67S High Carbon Steel Wire
Round C67S grade wire with 0.65% carbon content, diameter 0.9mm, unplated and suitable for cold heading fasteners. Commonly used in small screw and bolt production. Meets HTS 7217.10.80.60 criteria: high carbon, round, sub-1mm, not coated.
0.4mm Carbon Steel Fine Wire for Brushes
0.4mm diameter round wire of 0.65% carbon nonalloy steel, not plated, used in industrial wire brush filaments. High carbon provides necessary stiffness and wear resistance. HTS 7217.10.80.60 due to diameter under 1mm, high carbon, and uncoated status.
0.95mm SAE 1080 Steel Tire Cord Wire
SAE 1080 high-carbon (0.80% C) round wire, 0.95mm diameter, uncoated for rubber reinforcement in tire manufacturing. Provides high tensile strength for bead and belt applications. Fits HTS 7217.10.80.60: round, <1mm, ≥0.6% carbon, not plated.
0.3mm Piano Wire for Precision Instruments
Ultra-thin 0.3mm round piano wire with 0.85% carbon content, not coated, for tension elements in scientific and medical instruments. Exceptional straightness and strength characteristics. HTS 7217.10.80.60 classification for its high carbon, round form, sub-1mm size.
0.85mm Lockstitch Carbon Wire
0.85mm diameter high-carbon (0.72%) round steel wire for lockstitching in concrete formwork and reinforcement tying. Unplated black finish. Meets all criteria for HTS 7217.10.80.60 including carbon threshold and thin gauge.
0.55mm High Tensile Fine Wire for Filters
Round 0.55mm wire of 0.68% carbon nonalloy steel, high tensile strength for woven industrial filter screens. Not plated or coated. Precisely fits HTS 7217.10.80.60 parameters for thin high-carbon round wire.
0.75mm Carbon Steel Needle Wire
0.75mm round high-carbon (0.70%) steel wire for sewing machine needle blanks and precision piercing applications. Uncoated surface. HTS 7217.10.80.60 classification based on diameter, carbon content, and form.
0.65mm Hard Drawn Reinforcing Wire
High-carbon 0.65mm round wire (0.75% C) hard drawn for small mesh concrete reinforcement and plastering. No plating or coating applied. Classifies under HTS 7217.10.80.60 for its specific thin high-carbon characteristics.
0.45mm High Carbon Jewelry Wire
Fine 0.45mm round wire with 0.62% carbon for artisan jewelry making and chainmail fabrication. Not plated (to be worked further), black finish. HTS 7217.10.80.60 applies to uncoated high-carbon round wire under 1mm.
0.95mm PC Steel Strand Wire
0.95mm high-carbon (0.82%) round wire component for prestressed concrete strand cables. Individual wire not coated, to be stranded. Classifies in HTS 7217.10.80.60 before stranding process.
0.2mm Ultra-Fine Carbon Wire for Electronics
Extremely thin 0.2mm round high-carbon (0.60%) steel wire for micro-component springs and contacts in electronics assembly. No plating applied. HTS 7217.10.80.60 for sub-1mm high-carbon round uncoated wire.
0.8mm High-Carbon Spring Steel Wire
Round wire of nonalloy steel containing 0.6% or more carbon by weight, with a diameter of 0.8mm, not plated or coated. Used primarily for manufacturing small compression springs in precision instruments and automotive components. Falls under HTS 7217.10.80.60 due to its high carbon content, round cross-section, and sub-1mm diameter.
0.6mm Music Wire for Piano Strings
Ultra-fine round music wire of high-carbon nonalloy steel (0.7-1.0% carbon), diameter 0.6mm, not plated or coated. Specifically drawn for musical instrument strings requiring high tensile strength and elasticity. Classified under HTS 7217.10.80.60 for its carbon level, round shape, and thin diameter.
0.5mm Oil-Tempered Hard Drawn Wire
High-carbon (0.7%) round steel wire, 0.5mm diameter, oil-tempered for enhanced durability in mechanical springs. Not plated or coated, just polished surface. HTS 7217.10.80.60 applies to its thin diameter, round section, and carbon content.
0.7mm Hard Black Annealed Binding Wire
Round high-carbon steel wire (0.8% C), 0.7mm diameter, black annealed finish without plating for paper binding and light reinforcement. Not coated, meets 'not plated or coated' requirement. Classified in HTS 7217.10.80.60 for thin, round, high-carbon profile.