Heat-Treated Low Carbon Steel MIG Welding Wire 1.2mm
Round wire of nonalloy steel with less than 0.25% carbon, heat-treated for enhanced tensile strength, diameter 1.2mm, not plated or coated. Used primarily for MIG welding applications in automotive and fabrication industries. Classifies under 7217.10.4045 due to its specific diameter, low carbon content, and heat treatment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not heat-treated
Wire without heat treatment falls under the non-heat-treated subcategory within the same diameter range.
If alloy steel composition
Alloy steel wire, even with low carbon, moves to Chapter 72 alloy headings based on specific alloying elements.
If further worked or stranded
Stranded wire or wire subjected to further working like drawing beyond basic heat treatment classifies as articles of iron/steel.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying carbon content below 0.25% and heat treatment process to avoid reclassification
• Ensure accurate diameter measurement documentation as CBP may inspect shipments for the <1.5mm specification
Related Products under HTS 7217.10.40.45
Precision Heat-Treated Steel Spring Wire 1.0mm
Low carbon nonalloy steel round wire, heat-treated for spring temper, 1.0mm diameter, uncoated. Designed for manufacturing small mechanical springs in automotive and appliance sectors. Meets 7217.10.4045 as heat-treated round wire under 1.5mm with carbon <0.25%.
High Tensile Heat-Treated Steel Fence Wire 1.3mm
Round nonalloy steel wire (<0.25% C), heat-treated for high tensile strength, 1.3mm diameter, uncoated. Used for agricultural fencing and field boundaries. Classifies precisely under HTS 7217.10.4045 specifications.
Patented Heat-Treated Steel Craft Wire 0.9mm
Special heat-treated low carbon steel wire (0.25% max C), 0.9mm round, uncoated, for jewelry and craft applications. Heat treatment provides dead-soft temper for bending without breakage. Meets all criteria for 7217.10.4045 classification.
Medical Grade Heat-Treated Steel Guidewire Core 1.1mm
Precision heat-treated nonalloy steel core wire (<0.25% C), 1.1mm diameter, for catheter guidewire manufacturing. Uncoated round wire with specific heat treatment for torque transmission. Classifies under 7217.10.4045 before further medical device assembly.
Heat-Treated Low Carbon Steel Fine Wire 0.8mm
Ultra-fine round wire of nonalloy steel (<0.25% C), heat-treated for high tensile strength, 0.8mm diameter, not plated. Used in electronics manufacturing for lead wires and small fasteners. Specifically classified under 7217.10.4045 for its heat treatment and precise dimensions.
Annealed Heat-Treated Steel Binding Wire 1.4mm
Heat-treated (annealed) low carbon steel round wire, 1.4mm diameter, uncoated, for concrete reinforcement binding. Carbon content under 0.25% with specific heat treatment for flexibility. Fits 7217.10.4045 criteria exactly.