Hot-Rolled Iron L-Bar 40x40x4mm
L-profile bar made from hot-rolled pig iron or simple iron, 40x40x4mm for light construction. Falls in 7216.99.00.90 as angles of iron/nonalloy steel, other than cold-formed. Chapter 72 includes iron products without significant alloying.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If considered concrete reinforcing
Iron bars with deformations classify as rebar under 7213.91 per US Note (c).
If not fully rolled to profile
Incomplete rolled iron products before shaping classify under 7206.
If cast rather than rolled
Cast iron shapes/sections go to Chapter 73 castings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Confirm carbon content under 2% for nonalloy; high-carbon may be tool steel
ā¢ Label as 'angles' not 'bars' to avoid 7213/7214 confusion
ā¢ Rust discoloration gets no duty allowance per Chapter note
Related Products under HTS 7216.99.00.90
Nonalloy Steel Equal Leg Angle 50x50x5mm
Equal-sided angle profile of hot-rolled iron or nonalloy steel with 50mm legs and 5mm thickness, ideal for brackets and supports. Classified in 7216.99.00.90 as 'other' angles not cold-formed, not further worked, and not specialized profiles. Excludes alloy steels which would go to different subheadings.
Mild Steel T-Section 100x100x10mm
T-shaped structural section hot-rolled from mild nonalloy steel, used in beam supports and framing. Under 7216.99.00.90 as 'other shapes and sections' not cold-formed or further worked. Distinguishes from I-beams or universal mill plates per US Note (b).
Nonalloy Steel Hat Channel 75x25x2.5mm
Hat-shaped channel section hot-rolled nonalloy steel for ceiling grids, 75mm wide x 25mm high x 2.5mm thick. Classifies in 7216.99.00.90 as other shapes, hot-rolled without further work. Profile not U/I/H or cold-formed.
Mild Steel Half-Round Section 50mm Diameter
Semi-circular profile section hot-rolled from mild steel, 50mm across flats for decorative trim. HTS 7216.99.00.90 as other sections of nonalloy steel, not further worked. Not flat-rolled or bar per dimensions.
Hot-Rolled Nonalloy Steel Teardrop Section
Teardrop-shaped bulb section from hot-rolled nonalloy steel for edging and fillers, approx 40x20mm profile. Under 7216.99.00.90 for other shapes/sections excluding named profiles. Common in fabrication not meeting bar definitions.
Iron Angle Iron 3x3x1/4 Inch
Standard 3-inch equal angle iron hot-rolled from cast iron or simple iron for DIY projects. Classifies HTS 7216.99.00.90 as angles of iron, other. Lengths typically 20ft, no further processing.