Cold-Formed Steel Z-Purlin
Z-shaped purlin produced by cold-forming flat-rolled nonalloy steel for supporting roof and wall panels in pre-engineered buildings. Classified under HTS 7216.61.00.00 as cold-formed shapes from flat-rolled products, without further working like painting or coating.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If U, C, L or T sections specifically
Certain named profiles like C or L-sections have dedicated statistical suffixes under 7216.32 within cold-formed nonalloy steel.
If for concrete reinforcing bars with deformations
If twisted or deformed for rebar use, classified as concrete reinforcing per chapter note (c), not shapes.
If circular hollow sections rather than open profiles
Cold-formed tubes/pipes from flat-rolled steel are in 7213, separate from open angles/shapes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Include chemical composition analysis confirming nonalloy status; alloy content over threshold moves to different subheading
ā¢ Measure thickness and width to ensure compliance with flat-rolled origin; reject entries with clad or coated surfaces
Related Products under HTS 7216.61.00.00
Cold-Formed Steel Track Section
Top and bottom track profiles cold-formed from flat-rolled nonalloy steel for metal stud walls. Classified under HTS 7216.61.00.00 as cold-formed shapes without additional processing.
Cold-Rolled Steel Lipped Channel
Lipped C-channel section cold-formed from nonalloy steel flat-rolled products, commonly used in framing for modular construction. HTS 7216.61.00.00 applies to these cold-finished shapes not subject to further working such as enameling.
Cold-Formed Steel L-Angle
Equal-leg L-shaped angle cold-finished from nonalloy steel flat-rolled coil, used in light structural framing. HTS 7216.61.00.00 covers these cold-formed sections without additional surface treatments.
Cold-Formed Steel Furring Channel
Resilient furring channel cold-formed from nonalloy flat-rolled steel for sound isolation in wall/ceiling systems. HTS 7216.61.00.00 for these cold-formed sections not further worked beyond finishing.
Cold-Formed Steel Sigma Profile
Sigma-shaped (Ī£) section cold-formed from flat-rolled nonalloy steel, used in solar panel racking systems. Fits HTS 7216.61.00.00 criteria for cold-formed shapes from flat products without further surface treatments.
Cold-Formed Steel Edge Trim
J-channel edge trim cold-formed from nonalloy steel flat sheet for drywall finishing and protection. HTS 7216.61.00.00 applies to such cold-finished trim sections not further worked.