Hot-Roluded T250x125x20 Heavy Tee Section
Heavy-duty T section with 250 mm height, 125 mm flange, 20 mm thickness, from hot-rolled nonalloy steel. Classifies under HTS 7216.40.00 as oversized T profile not further worked. Used in crane runway beams and heavy supports.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If forged rather than rolled
Forged sections classified in 7214, distinct from hot-rolled/extruded processes.
If concrete reinforcing type
Deformations like ribs qualify as reinforcing per US note (c), different subheading.
If parts of industrial machinery
If imported specifically as machinery parts, end-use may shift to Chapter 84/85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Heavy items require proper dunnage; improper packing leads to damage claims denials
• Certify non-high-strength per US note (a) to avoid alloy misclassification
• Track HTS updates; structural steel subheadings frequently amended by presidential proclamations
Related Products under HTS 7216.40.00
Hot-Rolled T100x50x8 Light Tee Section
Lightweight T profile 100 mm high x 50 mm flange x 8 mm thick, nonalloy hot-rolled steel. HTS 7216.40.00 applies as T section over 80 mm not further worked. Used for purlins and secondary framing.
Hot-Rolled L100x100x10 Steel Angle
An L-shaped structural steel section with 100 mm leg lengths and 10 mm thickness, produced by hot-rolling nonalloy steel. It measures over 80 mm in height and lacks further working beyond hot-rolling, fitting HTS 7216.40.00 as an L section of iron or nonalloy steel. Used primarily in construction framing and supports.
Hot-Rolled T150x75x12 Steel Tee Section
A T-shaped nonalloy steel beam with 150 mm height, 75 mm flange width, and 12 mm thickness, hot-rolled without further processing. Qualifies under HTS 7216.40.00 due to its T profile, height over 80 mm, and lack of additional working. Commonly used in roof trusses and framing.
Hot-Extruded L200x200x20 Structural Angle
Large L-section angle of nonalloy steel, 200 mm per leg by 20 mm thick, produced via hot extrusion with no further working. Meets HTS 7216.40.00 criteria for L sections over 80 mm height from iron/nonalloy steel. Ideal for heavy industrial frameworks and bridges.
Hot-Rolled T200x100x16 Tee Beam Section
Tee section hot-rolled from nonalloy steel, featuring 200 mm stem height exceeding 80 mm, 100 mm flange, 16 mm web thickness. Classed in HTS 7216.40.00 as a non-further-worked T section of iron/nonalloy steel. Applied in floor joists and structural supports.
ASTM A36 L125x125x12 Hot-Rolled Angle
Standard ASTM A36 nonalloy steel L angle, 125 mm legs x 12 mm thick, hot-rolled without additional processing. Fits HTS 7216.40.00 for L sections over 80 mm height not further worked. Widely used in building columns and braces.