Precision Cold-Drawn 0.45% Carbon Steel Pin Stock
High-precision cold-drawn round stock with 0.45% carbon, 12 mm diameter, for dowel pins and machinery pivots. Fits HTS 7215.50.00.61 as cold-finished nonalloy steel rod, 0.25-0.6% carbon, under 76 mm cross-section.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength alloy per note (a)
High-strength specifications with minimum yield points classify as alloy steel.
If concrete reinforcing deformations
Bars with ribs/grooves per note (c) shift to specific reinforcing provisions.
If machined into complete machine parts
Finished machinery components classified by function in Chapter 84-85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify ground/polished finish tolerance; excessive polishing may qualify as 'further worked'
• Carbon content certification mandatory; 0.45% falls squarely in medium carbon range
• Avoid bundling with higher alloy materials; mixed shipments complicate entry
Related Products under HTS 7215.50.00.61
Cold-Formed 0.4% Carbon Steel Shafting Bar
A cold-finished round bar of nonalloy steel containing 0.4% carbon by weight, with a 25 mm diameter, used for manufacturing rotating shafts in industrial machinery. It falls under HTS 7215.50.00.61 as other bars and rods of iron or nonalloy steel, not further worked than cold-formed, with 0.25-0.6% carbon and cross-section under 76 mm.
Cold-Drawn 0.35% Carbon Steel Hexagonal Bar
Cold-drawn hexagonal bar of nonalloy steel with 0.35% carbon, 40 mm across flats, suitable for fasteners and structural components. Classified under HTS 7215.50.00.61 due to cold-forming process, carbon range 0.25-0.6%, and cross-section less than 76 mm.
Cold-Finished 0.5% Carbon Steel Round Machinery Bar
Precision cold-finished round bar with 0.5% carbon content, 50 mm diameter, for machine tool components and axles. Meets HTS 7215.50.00.61 criteria: nonalloy steel bars cold-formed/cold-finished, 0.25-0.6% carbon, diameter under 76 mm.
Cold-Rolled 0.28% Carbon Steel Square Bar
Cold-rolled square section bar of nonalloy steel at 0.28% carbon, 30 mm side length, used in jigs and fixtures. HTS 7215.50.00.61 applies to cold-formed nonalloy steel bars with this carbon content and cross-section under 76 mm.
Cold-Formed 0.55% Carbon Steel Bright Drawn Bar
Bright drawn finish bar, cold-formed from nonalloy steel with 0.55% carbon, 35 mm diameter for automotive applications. HTS 7215.50.00.61 covers this carbon range, cold-finishing process, and size specification.
Cold-Finished 0.3% Carbon Steel Flat Bar 50x10mm
Rectangular flat bar cold-finished, 0.3% carbon nonalloy steel, 50 mm width x 10 mm thick (45 mm diagonal <76 mm), for brackets. Classifies HTS 7215.50.00.61: cold-formed, specified carbon, cross-section under 76 mm.