Cold-Rolled Steel Key Stock
Cold-rolled flat bar stock of nonalloy steel (<0.25% C), 6 mm thick x 50 mm wide (cross-section ~300 mm² <76 mm equivalent), used for machine keyways. HTS 7215.50.0016 applies to cold-formed rectangular cross-section bars under 76 mm. Low carbon provides machinability for key cutting.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If supplied in hot-rolled condition
Bars and rods before cold-forming stage classify under hot-rolled headings 7213.
If silicon content exceeds 0.6% by weight
Higher silicon nonalloy steel moves to separate statistical suffix.
If alloy angles/shapes rather than bars
Alloy steel in angle, U/I/W shapes classifies differently from bars in 7228.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Calculate equivalent cross-sectional area for non-round shapes to confirm <76 mm classification limit
• Include precise width/thickness measurements in commercial invoice and packing list
• Separate from any pre-cut keys to avoid classification as finished articles under 7326
Related Products under HTS 7215.50.00.16
Cold-Finished Steel Roller Shafting
Cold-finished 38 mm round bar <0.25% C nonalloy steel for conveyor roller shafts. Provides precise diameter tolerance under HTS 7215.50.0016 limit of 76 mm. Smooth surface from cold-rolling process.
Low Carbon Cold-Formed Threaded Rod Blank
Cold-formed 16 mm round bar <0.25% C steel, smooth surface for subsequent threading into all-thread rod. HTS 7215.50.0016 as cold-finished bar stock under 76 mm. High ductility for threading operations.
Cold-Drawn Steel Handle Bar Stock
Cold-drawn 22 mm hexagonal bar <0.25% C nonalloy steel for tool handles. Cross flats 22 mm <76 mm for HTS 7215.50.0016. Provides strength with machinability.
Precision Cold-Finished Steel Pin Stock
9.5 mm dia cold-finished bar <0.25% C steel for clevis pins. Tight tolerance per HTS 7215.50.0016 under 76 mm. Excellent for heading and drilling.
Cold-Rolled Steel Strip Bar
Cold-rolled 3 mm x 25 mm flat bar <0.25% C steel (<76 mm section). HTS 7215.50.0016 for cold-formed flat products. Used in light fabrication.
Low Carbon Steel Cold-Heading Wire Blank
Cold-drawn 12.7 mm round 'wire blank' actually qualifying as bar <76 mm, <0.25% C. HTS 7215.50.0016 despite fastener end use. CHQ grade.