AISI 1045 Hot-Rolled Rectangular Steel Bar
Hot-rolled rectangular steel bar made from nonalloy steel with 0.45% carbon content, measuring 50mm x 25mm cross-section. Classified under HTS 7214.91.0060 as other bars of iron or nonalloy steel, rectangular (not square) cross-section, containing 0.25-0.6% carbon, not further worked beyond hot-rolling. Used in machinery manufacturing for structural components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing indentations, ribs, or twisted after rolling
Falls under concrete reinforcing bars/rods per Chapter 72 note (c), shifting to 7213 for deformed reinforcing bars.
If carbon content under 0.25% or 0.6%+
Carbon content determines subheading; lower/higher carbon moves to other rectangular bar categories in 7214.99.
If alloy steel with specified elements exceeding nonalloy limits
Chapter 72 notes define alloy vs nonalloy steel; even small additions like chromium >0.3% shift to Chapter 72 alloy headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate verifying carbon content between 0.25-0.6% and nonalloy composition to avoid reclassification
• Measure cross-section precisely; square or near-square profiles shift to different subheadings within 7214
• Confirm no further working (polishing, coating) occurred post-hot-rolling to maintain classification
Related Products under HTS 7214.91.00.60
C45 Hot-Rolled Rectangular Billet Stock
EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, 40mm x 20mm cross-section for forging applications. Fits HTS 7214.91.0060 as hot-rolled nonalloy steel bars of rectangular cross-section with 0.25-0.6% carbon, not further worked. Commonly used for axles and shafts.
1040 Grade Hot-Extruded Rectangular Steel Bar
AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, 60mm x 30mm profile. Meets HTS 7214.91.0060 criteria for nonalloy steel rectangular bars containing 0.25-0.6% carbon, processed only by hot-extrusion. Ideal for agricultural equipment components.
Medium Carbon S45C Rectangular Hot-Rolled Bar
JIS S45C medium carbon steel rectangular bar, hot-rolled, 0.45% carbon, 75mm x 25mm cross-section. Classifies in HTS 7214.91.0060 as nonalloy rectangular bars with 0.25-<0.6% carbon, not further worked. Used for gears and pinions.
XC50 Hot-Forged Rectangular Steel Stock
JIS XC50 hot-forged rectangular steel bar with 0.50% carbon content, 45mm x 30mm section. Qualifies for HTS 7214.91.0060 as forged nonalloy steel rectangular bar in 0.25-0.6% carbon range, without further working. Applications include hand tools and dies.
0.35% Carbon Hot-Drawn Rectangular Billet
Nonalloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, 55mm x 22mm cross-section. Falls under HTS 7214.91.0060 for hot-drawn rectangular bars of iron/nonalloy steel with 0.25-<0.6% carbon, not further worked. Used for bolt manufacturing.
EN8 Rectangular Hot-Rolled Steel Bar
BS EN8 (080M50) grade hot-rolled rectangular steel bar containing 0.40-0.45% carbon, 65mm x 28mm. Classifies HTS 7214.91.0060 as nonalloy rectangular hot-rolled bar 0.25-0.6% carbon. Common in UK/EU machinery fabrication.