Of a thickness exceeding 0.25 mm or more
Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated: > Otherwise plated or coated with zinc: > Of a width of less than 300 mm: > Of a thickness exceeding 0.25 mm or more
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7212.30.10
Zinc-Galvanized Steel Pipe Chase Cover
Narrow galvanized flat-rolled steel covers for wall pipe chases, >0.25 mm thick with zinc for plumbing protection. Fits HTS 7212.30.10 as nonalloy steel plated with zinc, width <300 mm. Conceals penetrations aesthetically.
Galvanized Steel Soffit Vent Strip
Zinc-coated narrow steel strips for soffit ventilation, thickness >0.25 mm, <300 mm wide for airflow and protection. HTS 7212.30.10 for flat-rolled nonalloy zinc-plated steel. Enables attic ventilation while blocking pests.
Galvanized Steel Roofing Flashing
Narrow galvanized steel strips used for roofing flashing, with width under 300 mm and thickness over 0.25 mm, coated with zinc to prevent corrosion. Classified under HTS 7212.30.10 as flat-rolled nonalloy steel, plated with zinc, in narrow widths for construction applications. The zinc coating provides essential weather resistance for exterior building use.
Zinc-Coated Steel Drywall Corner Bead
Galvanized steel corner beads for drywall installation, under 300 mm wide and over 0.25 mm thick, zinc-plated for rust protection in construction. Falls under HTS 7212.30.10 due to narrow flat-rolled form, nonalloy steel with zinc coating before final assembly. Essential for straight, durable wall edges in interior finishing.
Galvanized Steel HVAC Duct Flange
Zinc-plated steel flanges for HVAC duct connections, flat-rolled under 300 mm wide and exceeding 0.25 mm thickness for structural strength. HTS 7212.30.10 applies to this nonalloy steel product with zinc coating for corrosion resistance in ventilation systems. Used in assembling airtight ductwork.
Zinc-Plated Steel Shelf Bracket Strip
Narrow galvanized flat-rolled steel for shelf brackets, thickness over 0.25 mm and width less than 300 mm, coated for indoor rust prevention. Classified in HTS 7212.30.10 as nonalloy steel plated or coated with zinc in flat form prior to fabrication. Provides support in shelving systems.
Galvanized Steel Electrical Conduit Strap
Zinc-coated flat steel straps for securing electrical conduits, under 300 mm wide and thicker than 0.25 mm for durability. HTS 7212.30.10 covers this narrow nonalloy steel product plated with zinc for corrosion protection in wiring installations. Prevents conduit movement in buildings.
Zinc-Coated Steel Gutter Apron Flashing
Narrow galvanized steel apron flashing for roof-to-gutter transitions, thickness >0.25 mm, width <300 mm with zinc plating for longevity. Fits HTS 7212.30.10 as flat-rolled nonalloy steel otherwise plated with zinc. Protects against water infiltration at roof edges.
Galvanized Steel Door Jamb Reinforcement
Zinc-plated flat-rolled steel strips reinforcing door jambs, <300 mm wide, >0.25 mm thick for impact resistance. HTS 7212.30.10 for nonalloy steel with zinc coating in narrow flat form. Enhances security in residential/commercial doors.
Zinc-Galvanized Steel Fence Rail Clip Base
Narrow galvanized flat steel bases for fence rail clips, thickness exceeding 0.25 mm, zinc coated against outdoor corrosion. Classified HTS 7212.30.10 as nonalloy flat-rolled product plated with zinc, width <300 mm. Secures fencing in perimeter applications.
Galvanized Steel Window Drip Cap
Zinc-coated narrow steel drip caps for window protection, >0.25 mm thick, <300 mm wide to direct water away from frames. HTS 7212.30.10 applies to this flat-rolled nonalloy steel zinc-plated product. Prevents moisture damage in fenestration.
Zinc-Plated Steel Siding Trim Strip
Galvanized flat-rolled steel trim for siding edges, thickness over 0.25 mm, narrow width under 300 mm with zinc corrosion barrier. Fits HTS 7212.30.10 for nonalloy steel plated or coated with zinc. Finishes exterior wall installations cleanly.
Galvanized Steel Expansion Joint Cover
Narrow zinc-coated steel sheets for floor expansion joint covers, >0.25 mm thick, <300 mm wide for thermal movement. HTS 7212.30.10 as flat-rolled nonalloy steel zinc-plated prior to installation. Accommodates building settlement.
Zinc-Coated Steel Deck Flashing
Galvanized narrow steel flashing for roof decks, thickness exceeding 0.25 mm with zinc plating for weather exposure. Classified under HTS 7212.30.10 for flat-rolled nonalloy steel, width <300 mm, zinc coated. Seals deck-to-wall transitions.
Galvanized Steel Baseboard Radiator Shield
Zinc-plated flat steel shields for baseboard heating systems, narrow <300 mm, thick >0.25 mm for heat reflection. HTS 7212.30.10 covers nonalloy zinc-coated flat-rolled products. Protects walls from radiator heat.