Cold-Rolled Mild Steel Shim Stock 2.5 mm Thick
Precision cold-rolled mild steel shim sheets, 500 mm wide, 2.5 mm gauge, for machinery alignment and spacing. Falls under 7211.29.60.30: nonalloy steel, cold-reduced, thickness exceeding 1.25 mm, width <600 mm, no coatings. Mill finish for gauging applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel specs
High-strength steel per note (a) with minimum yield points classifies under 7228.
If width 300-600 mm specific category
Statistical suffixes differentiate within 7211.29 but same duty; watch reporting.
If twisted or deformed like rebar
Concrete reinforcing bars/rods with deformations (note c) go to 7215.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill test reports must confirm low carbon nonalloy composition to avoid alloy steel headings
• Specify 'not further worked' status; any polishing/burnishing per chapter note reclassifies
• Accurate thickness measurement critical as 1.25mm threshold separates subheadings
Related Products under HTS 7211.29.60.30
Narrow Cold-Rolled Steel for Saw Blades
Cold-rolled carbon steel strip, 1.9 mm thick, 150 mm wide, for bandsaw and hacksaw blade backing. HTS 7211.29.60.30 as nonalloy flat-rolled product, cold-reduced only. Flexible temper for high-speed cutting tools.
Cold-Rolled Nonalloy Steel Strip for Automotive Trim
Flat-rolled nonalloy steel strip, cold-rolled, under 600 mm width, thickness 1.5 mm, used for manufacturing automotive exterior trim panels. Classified under 7211.29.60.30 as not further worked beyond cold-rolling, not clad, plated or coated. Meets chapter definition for nonalloy steel flat products.
Cold-Reduced Carbon Steel Sheet for Appliance Housings
Cold-reduced flat-rolled carbon steel sheet, 2 mm thick, 450 mm wide, for washing machine and refrigerator outer housings. Under HTS 7211.29.60.30 as nonalloy steel, cold-rolled only, not further worked, no plating or coating. Standard mill finish for subsequent fabrication.
Narrow Cold-Rolled Steel Banding Strap 1.8 mm Thick
Cold-rolled nonalloy steel banding, 350 mm wide, 1.8 mm thick, used for cargo securing and palletizing. HTS 7211.29.60.30 applies as flat-rolled, cold-reduced, not further worked, width under 600 mm. Produced specifically for industrial packaging applications.
Cold-Reduced Steel for HVAC Duct Fabrication
Cold-rolled nonalloy steel sheet, 1.6 mm thick, 550 mm wide, for fabricating commercial HVAC ductwork. HTS 7211.29.60.30: flat-rolled iron/nonalloy steel, cold-reduced only, no cladding/coating. Standard for sheet metal shop processing.
Narrow Cold-Rolled Steel for Transformer Cores
Cold-rolled low-carbon steel strip, 1.4 mm thick, 280 mm wide, for electrical transformer core laminations. Under 7211.29.60.30 as nonalloy flat-rolled product, cold-reduced, not further worked. Grain-oriented for magnetic properties.