Cold-Rolled Narrow Strip for Electrical Contacts
Nonalloy steel cold-reduced to 0.29 mm x 46 mm width in coils, base material for silver-plated electrical contacts. Classifies HTS 7211.29.20.30 as uncoated cold-rolled product before plating operation. Consistent cross-section for automated stamping.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If assembled into finished contacts
Electrical contact assemblies with insulation classify in Chapter 85 insulated wire harnesses.
If tool steel grade for contacts
Alloy tool steels per U.S. note (e) classify under appropriate 72xx alloy headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Plating house certifications confirm uncoated import status for proper HTS
• Conductivity specs irrelevant for steel classification; focus on physical dimensions
• Surface cleanliness certificates prevent coating misclassification
Related Products under HTS 7211.29.20.30
Cold-Rolled Narrow Steel Strip for Razor Blades
Cold-rolled nonalloy steel strip, 0.3 mm thick and 45 mm wide, supplied in coils for razor blade production. Classified under HTS 7211.29.20.30 as flat-rolled iron or nonalloy steel, cold-reduced, width under 51 mm, thickness over 0.25 mm, not further worked. Meets razor blade steel specs but imported as raw strip, not certified for duty reduction.
Cold-Reduced Steel Coil for Precision Springs
Narrow cold-rolled nonalloy steel coil, 38 mm wide x 0.4 mm thick, for manufacturing small mechanical springs. Fits HTS 7211.29.20.30 criteria: width under 51 mm, thickness exceeding 0.25 mm, in coils, cold-reduced but not further worked. High flatness tolerance suitable for spring forming.
Narrow Cold-Rolled Steel for Saw Blades
Cold-reduced nonalloy steel strip in 48 mm width coils, 0.35 mm thick, used as backing material for circular saw blades. HTS 7211.29.20.30 applies to this not-further-worked product with width <51 mm and appropriate thickness. Provides necessary temper for subsequent heat treatment.
Cold-Rolled Shim Stock Steel Coil
Precision cold-rolled nonalloy steel coil, 42 mm wide and 0.28 mm thick, used for manufacturing shim stock and gaskets. Meets all HTS 7211.29.20.30 specifications for narrow, thicker-than-0.25 mm cold-reduced coils not clad or coated. Gauge tolerance ±0.001 mm for precise applications.
Narrow Cold-Reduced Steel for Clips and Fasteners
Nonalloy steel cold-rolled to 0.32 mm thickness, 49 mm width in coils, for progressive die stamping of metal clips and fasteners. HTS 7211.29.20.30 classification for cold-reduced flat products, width <51 mm, thickness >0.25 mm, supplied in manufacturing coils. Surface finish suitable for high-speed stamping.
Cold-Rolled Banding Steel Coil
Narrow cold-reduced nonalloy steel, 50 mm wide x 0.30 mm thick in coils, specifically for strapping and banding applications. Classifies under HTS 7211.29.20.30 as cold-rolled flat-rolled product under 51 mm width with thickness over 0.25 mm. High yield strength for tension wrapping.