Cold-Rolled Burr Tool Steel Blank
Thin cold-rolled low-carbon strip (<0.25 mm, narrow) for forming rotary dental and jeweler's burrs. HTS 7211.23.4500: nonalloy steel, precise cold-reduction without further working. Blank stock before fluting/grinding operations.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported with cutting flutes/patterns
Tools with working edges or teeth classify as interchangeable tools regardless of material.
If higher carbon content for tool hardness
Burr tools often require ≥0.25% carbon for proper heat treatment response.
If assembled into complete dental drill
Finished dental instruments classify under Chapter 90 medical devices.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Dental suppliers coordinate with FDA device listings
• Distinguish blanks from finished tools to avoid Chapter 82 classification
• Edge condition documentation prevents 'trimmed' further-worked disputes
Related Products under HTS 7211.23.45.00
Cold-Rolled Razor Blade Steel Strip
Thin flat-rolled nonalloy steel strip under 0.25 mm thick and less than 300 mm wide, with low carbon content (<0.25%), specifically certified for razor blade production. It falls under HTS 7211.23.4500 as cold-rolled, not further worked, meeting the exact dimensional and composition criteria. This high-precision strip is ideal for cutting into sharp edges without additional processing.
Cold-Rolled Narrow Electronics Shunt Strip
Precision cold-rolled low-carbon steel strip under 0.25 mm thick for current shunt resistors in electronic circuit boards. Meets HTS 7211.23.4500 specs: nonalloy, <300 mm wide, cold-reduced without coatings. Low resistance and high precision essential for accurate current measurement.
Cold-Rolled Stencil Steel Foil
Ultra-thin cold-rolled nonalloy steel foil (<0.25 mm) in narrow widths for industrial stencil cutting and marking applications. Precisely fits HTS 7211.23.4500: low carbon, cold-reduced, no further working or coatings. Durable for repeated laser/perforation forming into stencils.
Cold-Rolled Medical Blade Steel Strip
Thin precision cold-rolled low-carbon steel strip (<0.25 mm thick, narrow width) for disposable surgical scalpel and biopsy blades. HTS 7211.23.4500 due to nonalloy composition, exact cold-rolled specs without further processing. Provides sharpness and sterility compatibility.
Cold-Rolled Model Maker Steel Shim
Narrow cold-rolled nonalloy steel shims (<0.25 mm thick) for prototype and model building precision alignment. Classified HTS 7211.23.4500: low carbon, cold-reduced, <300 mm wide, no coatings. Essential for aerospace and automotive mockups.
Cold-Rolled Precision Shim Stock
Ultra-thin cold-rolled nonalloy steel sheets under 0.25 mm thick and narrow width under 300 mm, used for machinery shimming and gapping. Classified under HTS 7211.23.4500 due to low carbon content, cold-rolled state without further working, and precise dimensions. Provides accurate spacing in industrial assemblies.