Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled nonalloy steel strip (width 280 mm, thickness 2 mm, <0.25% C) used for industrial packaging banding. Meets HTS 7211.23.20.00 criteria: cold-rolled, not further worked, width <300 mm, thickness >1.25 mm, no plating. Essential for securing cargo during shipping.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled rather than cold-rolled
Processing method (hot vs cold-rolled) separates 7210 from 7211 headings.
If coated with plastics or painted
Coating with nonmetallic substances constitutes 'further worked' per Chapter definition, moving to cladded/plated headings.
If imported as finished fish plates or sole plates
Articles of iron/steel (fabricated products) classified by specific use in Chapter 73, not as flat-rolled semi-finished.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Provide chemical analysis confirming <0.25% carbon per US Note requirements. 2
• No duty reduction for rust/discoloration per Chapter note. 3
• Watch for edge condition; trimmed edges may trigger different cold-rolled subheading
Related Products under HTS 7211.23.20.00
Cold-Rolled Low-Carbon Steel Strip for Automotive Trim
Flat-rolled nonalloy steel strip, width 250 mm, thickness 1.5 mm, less than 0.25% carbon, cold-rolled without further surface treatments. Classified under HTS 7211.23.20.00 as a narrow cold-rolled product not clad, plated, or coated, exceeding 1.25 mm thickness. Used primarily for interior and exterior automotive trim components.
Narrow Cold-Rolled Steel Shim Stock 1.6mm
Precision cold-rolled low-carbon steel sheet (width 290 mm, 1.6 mm thick, <0.25% C) sold as shim stock for machinery alignment. HTS 7211.23.20.00 applies to this not-further-worked, uncoated narrow strip exceeding 1.25 mm thickness.
Cold-Rolled Low-Carbon Steel for Lock Washer Blanks
Cold-reduced nonalloy steel strip (width 250 mm, 1.8 mm thick, <0.25% carbon) supplied as blanks for stamped lock washers. Classified HTS 7211.23.20.00: narrow, cold-rolled, thickness >1.25 mm, no further working or coating.
Industrial Cold-Rolled Steel Mounting Strip 2.2mm
Narrow cold-rolled nonalloy steel (width 295 mm, 2.2 mm thick, C<0.25%) for equipment mounting brackets. HTS 7211.23.20.00: cold-reduced flat-rolled product, <300 mm wide, >1.25 mm thick, not clad/plated/coated.
HVAC Cold-Rolled Steel Flange Stock 1.4mm
Cold-rolled low-carbon steel strip (width 280 mm, 1.4 mm thick, <0.25% C) for HVAC duct flanges. Precisely matches HTS 7211.23.20.00 specifications for narrow, thick cold-reduced nonalloy steel without further working.
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced nonalloy steel (width 260 mm, 1.75 mm thick, <0.25% C) for appliance mounting brackets. HTS 7211.23.20.00 classification for cold-rolled products >1.25 mm thick, not further worked.