Hot-Rolled Checkered Steel Sheet 3.2mm x 520mm
Nonalloy steel sheet with raised pattern from hot-rolling (not relief pattern excluded), 3.2 mm x 520 mm wide, not further worked. 'Other' category HTS 7211.19.75.90 applies.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with patterns in relief per exclusion
Universal mill plates specifically exclude patterns in relief.
If chemically treated surface
Phosphatizing or other chemical treatments count as further worked per note.
If alloyed with Cr/Ni
Alloy steel flats hot-rolled <600mm fall under heading 7210.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Document pattern produced during hot-rolling, not added later. 2
• Test cert for nonalloy composition essential. 3
• Inspect coils/sheets for allowable surface oxide
Related Products under HTS 7211.19.75.90
HRPO Steel Sheet 2mm x 450mm
Hot-rolled pickled and oiled (HRPO) nonalloy steel sheet, 2 mm thick by 450 mm wide, not clad or coated beyond oiling incidental to process. Classified in HTS 7211.19.75.90 as other hot-rolled flat products <600mm wide, not further worked per Chapter note.
3mm Hot-Rolled Mild Steel Band 550mm Wide
Mild steel band hot-rolled to 3 mm thickness and 550 mm width, not clad, plated, coated, or further worked. HTS 7211.19.75.90 covers such narrow hot-rolled nonalloy flats excluding specific types like rebar.
Hot-Rolled A36 Steel Plate 4.5mm x 400mm
A36 grade nonalloy steel plate, hot-rolled 4.5 mm thick x 400 mm wide, without patterns or further working. Fits HTS 7211.19.75.90 as other hot-rolled flats <600mm, not universal mill plate.
2.8mm Hot-Rolled Low Carbon Steel Strip 300mm Wide
Low carbon nonalloy steel strip hot-rolled to 2.8 mm x 300 mm, not clad/plated/coated or further worked. HTS 7211.19.75.90 for such narrow miscellaneous hot-rolled products.
5mm Hot-Rolled Nonalloy Steel Blank 480mm Wide
Steel blanks cut from hot-rolled nonalloy plate, 5 mm thick x 480 mm wide, no cladding/coating/further working. Classifies as other under HTS 7211.19.75.90.
Hot-Rolled 1.5mm x 500mm Steel Strip
Flat-rolled nonalloy steel strip, 1.5 mm thick and 500 mm wide, hot-rolled without cladding, plating, or coating, and not further worked. Falls under HTS 7211.19.75.90 as 'other' hot-rolled products of width less than 600 mm, excluding universal mill plates and concrete reinforcing bars.