Hot-Rolled Non-Alloy Steel Coil 1.5mm Thick 500mm Wide Untrimmed Edges
This is a flat-rolled product of nonalloy steel, hot-rolled, in coils, with a width of 500 mm (less than 600 mm), and featuring untrimmed mill edges. It falls under HTS 7211.19.75.30 because it is not further worked beyond hot-rolling, not clad, plated, or coated, and specifically has untrimmed edges as produced during rolling.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If edges are trimmed
Trimmed edges (mill trimmed or slitted) are classified separately from untrimmed mill edges in the same hot-rolled nonalloy steel coil category.
If width 600mm or more
Hot-rolled nonalloy steel coils of 600mm width or wider fall under heading 7210, differentiated by width threshold from narrower 7211 products.
If clad, plated, or coated
Any cladding, plating, or coating (per Chapter 72 definition of further worked) moves the product out of 7211 to clad/plated/coated steel in 7212.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify exact width measurement (<600mm) and confirm untrimmed edges via mill certificates to avoid reclassification to trimmed edge subheadings
• Provide chemical composition analysis proving nonalloy steel (max 0.3% combined other elements) as per Chapter 72 notes
• Ensure no further working like polishing or coating has occurred, as this would shift to 7212; inspect for rust but note no duty allowance per US notes
Related Products under HTS 7211.19.75.30
HRPO Base Steel Coil 2.0mm x 450mm Wide Mill Edge
Hot-rolled nonalloy steel coil used as base material before pickling (HRPO process), 2.0mm thick, 450mm wide, with untrimmed edges. Classified under HTS 7211.19.75.30 as hot-rolled not further worked, in coils under 600mm width with characteristic untrimmed edges.
Hot-Rolled Mild Steel Slit Coil 1.2mm x 380mm Untrimmed
Low-carbon mild steel hot-rolled into coils, 1.2mm thickness, 380mm width, retaining untrimmed edges typical of primary mill production. HTS 7211.19.75.30 applies to these narrow nonalloy steel coils not further worked beyond hot-rolling.
Nonalloy Steel Hot Band Coil 3mm x 550mm Mill Edge
Hot band refers to primary hot-rolled steel coil directly from rolling mill, 3mm thick, 550mm wide (<600mm), untrimmed edges. Perfectly matches HTS 7211.19.75.30 for not further worked, nonalloy, narrow coil with mill edges.
Pickle Line Feed Stock Steel Coil 1.8mm x 420mm Untrimmed
Hot-rolled nonalloy steel coil prepared for pickling line processing, 1.8mm gauge, 420mm width, untrimmed mill edges preserved. HTS 7211.19.75.30 covers this not-further-worked narrow coil product before any surface treatments.
Automotive Stamping Blank Hot-Rolled Coil 2.5mm x 480mm Mill Edge
Hot-rolled nonalloy steel coil for automotive outer body panel stamping, 2.5mm thick, 480mm wide, untrimmed edges. Classifies under HTS 7211.19.75.30 as basic hot-rolled coil not further worked, narrow width.
Appliance Shell Hot-Rolled Steel Coil 1.0mm x 350mm Untrimmed
Thin hot-rolled nonalloy steel coil for washing machine/tumble dryer outer shells, 1.0mm thick, 350mm width, mill untrimmed edges. HTS 7211.19.75.30 for hot-rolled narrow coils not further worked.