High-Strength Steel Hot-Rolled Slit Coil Cut Flat 2.5mm x 450mm
Slit and cut-to-length from hot-rolled coil, high-strength steel strip 2.5mm thick (yield ≥275 MPa), 450mm wide, presented flat not in coils, no further working. HTS 7211.19.4500 applies as not further worked hot-rolled high-strength steel <600mm width. Used for trailer manufacturing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness ≥3mm but <4.75mm
Thicker hot-rolled products have separate statistical provisions within 7211.19.
If pickled and oiled
Chemical surface treatment (oxalating/phosphatizing) counts as 'further worked' per chapter note.
If fabricated into articles
Bending/welding into finished parts moves from semi-finished 72 to articles in 73.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish slit coil cut-to-length (still 7211) from true cold-rolled (7210); retain hot-rolled mill edge
• No duty allowance for rust per chapter note; enter clean or face full value assessment
• Track country of melt/found; Section 232 applies regardless of processing location
Related Products under HTS 7211.19.45.00
High-Strength Steel Hot-Rolled Strip 1.5mm x 400mm
Flat-rolled hot-rolled strip of nonalloy high-strength steel with thickness under 3mm and minimum yield point of 275 MPa, width 400mm under 600mm, not further worked beyond hot-rolling. Classified under HTS 7211.19.4500 as high-strength steel per U.S. note (a), not clad, plated, or coated. Used in automotive structural components requiring high yield strength.
High-Strength Steel Hot-Rolled Sheet 2.8mm x 550mm
Hot-rolled sheet of high-strength nonalloy steel, 2.8mm thick (<3mm) with yield strength ≥275 MPa, 550mm width, supplied flat without coils or further working. Meets HTS 7211.19.4500 definition for high-strength steel not clad/plated/coated. Ideal for heavy-duty machinery frames.
High-Strength Steel Band 2.2mm x 300mm
Narrow hot-rolled band of high-strength steel (<3mm thick, ≥275 MPa yield), 300mm wide, not further worked, used for strapping in industrial packaging. Fits HTS 7211.19.4500 as flat-rolled nonalloy high-strength steel, width <600mm, not coated. Provides superior tensile strength for heavy load securing.
High-Strength Steel Flat 1.8mm x 500mm
Hot-rolled flat product of high-strength nonalloy steel, 1.8mm thickness with 275 MPa minimum yield, 500mm width under 600mm, no cladding or plating. Directly classified in HTS 7211.19.4500 for not further worked high-strength steel. Applied in agricultural equipment fabrication.
High-Strength Steel Narrow Hot-Rolled Strip 1.2mm x 200mm
Narrow high-strength steel hot-rolled strip, 1.2mm thick with minimum 275 MPa yield point, 200mm width, not clad or coated, not further worked. Classifies precisely in HTS 7211.19.4500 for flat-rolled high-strength nonalloy steel <600mm. Common in appliance reinforcement.
High-Strength Steel Hot-Rolled Blank 2.9mm x 580mm
Hot-rolled blanks cut from high-strength steel strip, 2.9mm thickness (<3mm), yield ≥275 MPa, 580mm width, rectangular shape without further processing. HTS 7211.19.4500 for not further worked flat-rolled high-strength steel. Used as press blanks for automotive parts.