Hot-Rolled Steel Plate 10mm Thick 500mm Wide
A flat-rolled nonalloy steel plate, hot-rolled to 10 mm thickness and 500 mm width, not further worked beyond hot-rolling, unclad, unplated, and uncoated. It falls under HTS 7211.14.00.90 as it meets the criteria for flat-rolled products of iron or nonalloy steel under 600 mm width, thickness 4.75 mm or more, and 'other' category excluding universal mill plates.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If width exceeds 600 mm
Products 600 mm or wider in hot-rolled state fall under heading 7208 for flat-rolled steel of wider dimensions.
If thickness under 4.75 mm
Thinner hot-rolled sheets (<4.75 mm) are classified in 7211.19 subheadings regardless of width under 600 mm.
If clad, plated, or coated
Any cladding, plating, or coating excludes from 7211.14 and moves to 'clad, plated or coated' provisions in 7211.90.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify steel composition meets nonalloy steel definition (no specified alloying elements exceeding chapter note limits) with mill test certificates
• Measure exact width (<600 mm) and thickness (≥4.75 mm) at time of entry to avoid reclassification to wider products in 7208
• Ensure no further working like polishing or coating occurred, as that shifts to 7211.90 or Chapter 73 headings
Related Products under HTS 7211.14.00.90
Hot-Rolled Mild Steel Slab 6mm Thick 450mm Wide
Mild steel flat-rolled product hot-rolled to 6 mm thickness and 450 mm width, supplied not further worked, without cladding or coatings. Classified under HTS 7211.14.00.90 for other hot-rolled nonalloy steel plates narrower than 600 mm and at least 4.75 mm thick.
HRPO Steel Sheet 5mm Thick 550mm Wide
Hot-rolled pickled and oiled (HRPO) nonalloy steel sheet, 5 mm thick by 550 mm wide, but oiled surface treatment may qualify as minimal per chapter notes if not considered 'further worked'. Fits HTS 7211.14.00.90 as other hot-rolled flat products under 600 mm width, thickness over 4.75 mm.
Carbon Steel Hot Band 8mm x 400mm
Flat-rolled carbon steel hot band, 8 mm thickness, 400 mm width, hot-rolled only without additional processing, not plated or coated. HTS 7211.14.00.90 applies to these 'other' dimensions of nonalloy hot-rolled products less than 600 mm wide.
Industrial Hot-Rolled Steel Blank 7mm Thick 300mm Wide
Hot-rolled steel blanks for industrial machining, 7 mm thick and 300 mm wide, nonalloy composition, no cladding or coatings applied. This product matches HTS 7211.14.00.90 for other hot-rolled flat-rolled iron/nonalloy steel under 600 mm width and over 4.75 mm thick.
Shipbuilding Steel Plate 9mm x 580mm Hot-Rolled
Nonalloy hot-rolled steel plate for shipbuilding applications, 9 mm thick, 580 mm width, supplied as-rolled without further treatments. Falls precisely under HTS 7211.14.00.90 as other flat-rolled products not exceeding 600 mm width.
Construction Hot-Rolled Steel Flitch 4.8mm x 500mm
Hot-rolled nonalloy steel flitch for construction reinforcement base, exactly 4.8 mm thick (just over 4.75 mm threshold), 500 mm wide, no coatings. HTS 7211.14.00.90 covers this 'other' category precisely.