Electrolytic Chromium Coated Tinplate Alternative
Tinplate with electrolytic chromium coating over tin layer, 0.75 mm thick, 1,100 mm wide for enhanced can stock. Still HTS 7210.11.00.00 as primary tin-plated nonalloy steel ≥0.5 mm, >600 mm wide. Chromium passivates surface for better lacquer adhesion.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If chromium is primary coating
Primary chromium oxide coating has dedicated subheading.
If simply cold-rolled without plating
Removes all coating requirements for base steel classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish ECC from pure chromium plate via coating specs
• Layer sequence documentation prevents misclassification
• Rust specs don't allow duty allowance per Chapter 72 note
Related Products under HTS 7210.11.00.00
Electrolytic Tinplate for Beverage Cans
Flat-rolled nonalloy steel sheet, 0.6 mm thick and 1,000 mm wide, coated with electrolytic tin on both sides for corrosion resistance. Classified under HTS 7210.11.00.00 as tin-plated steel of 0.5 mm or more thickness, width over 600 mm. The tin plating protects the steel from oxidation during food and beverage canning.
Tin-Coated Steel for Food Cans
0.8 mm thick tin-plated nonalloy steel coil, 800 mm wide, with bright electrolytic tin finish for canned goods packaging. Fits HTS 7210.11.00.00 due to tin plating, thickness ≥0.5 mm, and width >600 mm. Provides barrier against acidity in preserved foods.
ETP Tinplate Coils for Aerosol Cans
Electrolytic tin-plated steel coils, 0.55 mm thickness, 1,200 mm width, designed for aerosol and general line canning. HTS 7210.11.00.00 applies for tin-plated nonalloy flat-rolled products ≥0.5 mm thick, >600 mm wide. Tin layer ensures seal integrity and product protection.
Prime Tinplate Sheets for Can Ends
Cut-to-length tinplate sheets, 0.7 mm thick, 900 mm wide, electrolytic tin coated for manufacturing can lids and ends. Classified HTS 7210.11.00.00 as plated nonalloy steel ≥0.5 mm, width exceeding 600 mm. Critical for hermetic sealing in metal packaging.
Tin Mill Black Plate with Tin Coating
Tin mill products of nonalloy steel, 1.0 mm thick, 750 mm wide, electrolytically tin coated after black plate rolling. HTS 7210.11.00.00 for tin-plated flat-rolled ≥0.5 mm thick, >600 mm wide. Used in decorative and industrial tin packaging.
DR8 Tinplate for General Line Cans
DR8 grade double reduced electrolytic tinplate, 0.5 mm minimum thickness, 1,050 mm width for general line metal cans. Precisely HTS 7210.11.00.00: tin-plated nonalloy steel flat-rolled products ≥0.5 mm, >600 mm wide. Balances formability and strength for can body stock.