Blackplate Cold-Rolled Steel for Closure Stock
Thin blackplate coil <0.361 mm x ≥600 mm, cold-rolled nonalloy steel for twist-off closures and lids. Precisely HTS 7209.18.25: flat-rolled cold-reduced in coils, not further worked, blackplate subclass by thickness. High formability for sealing applications.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of 0.5 mm or thicker sheets
Thicker cold-rolled sheets in 7210.11 vs thin blackplate coils
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document for food-grade potential but classify as raw material; verify no chemical treatments
• Thickness tolerance ±0.01 mm typical—enforce with specs
• Separate from chipper knife steel compositions
Related Products under HTS 7209.18.25
Cold-Rolled Blackplate Steel Coil for Can Manufacturing
Thin cold-rolled blackplate steel coil, under 0.361 mm thick and 600 mm or wider, used primarily for fabricating metal food and beverage cans. Classified under HTS 7209.18.25 as flat-rolled nonalloy steel, cold-reduced in coils, not further worked beyond cold-rolling, and specifically as blackplate due to its matte finish and thickness. Meets chapter definitions excluding alloy steels, cladding, plating, or coatings.
Blackplate Cold-Rolled Steel Coil for Aerosol Cans
Cold-rolled nonalloy steel blackplate in coils, thickness below 0.361 mm, width over 600 mm, ideal for aerosol can bodies. Falls under HTS 7209.18.25 as uncoated, unclad cold-reduced flat-rolled product not further worked, distinguished by blackplate thinness from thicker cold-rolled steel. Excludes high-strength or alloy compositions per U.S. notes.
MR Type Blackplate Steel Coil for General Tinplate Base
Medium Rockwell (MR) grade cold-rolled blackplate steel coils under 0.361 mm thick, 600+ mm wide, serving as base stock for tinplate production. HTS 7209.18.25 applies to this not-further-worked, unclad cold-reduced nonalloy flat-rolled product specifically categorized as blackplate. Used in packaging industries pre-coating.
Cold-Reduced Blackplate Coil for Beverage Can Ends
Ultra-thin blackplate cold-rolled steel in coils, <0.361 mm x ≥600 mm, optimized for easy-open beverage can lids and ends. Precisely matches HTS 7209.18.25 criteria: nonalloy, cold-reduced flat-rolled in coils, no cladding/coating/further working, blackplate subclass. Key material for high-speed stamping.
T1-T5 Temper Blackplate Steel Coil for Food Cans
T1 to T5 temper cold-rolled blackplate coils, thickness <0.361 mm and width ≥600 mm, for three-piece welded food cans. HTS 7209.18.25 covers this nonalloy steel flat-rolled product as cold-reduced in coils without further working, specifically blackplate gauge. Temper affects formability for canning.
DR-8 Blackplate Cold-Rolled Coil for Paint Cans
DR-8 (double reduced) blackplate steel coil, cold-rolled to <0.361 mm thickness, ≥600 mm wide, suited for paint and chemical can stock. Classifies in HTS 7209.18.25 as nonalloy flat-rolled cold-reduced product in coils, blackplate spec, no further treatments. Double reduction enhances strength for rigid packaging.