Annealed Cold-Rolled Blackplate Coil for Food Packaging
Ultra-thin annealed blackplate steel coils (<0.361 mm thick, >600 mm wide) optimized for food-grade packaging like sardine and beverage cans. Annealing restores ductility lost during cold-rolling, enabling complex forming without cracking. Classified in HTS 7209.18.25.20 as not further worked beyond cold-rolling and annealing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If coated for corrosion resistance
Coated or clad blackplate for packaging classifies under heading 7210.
If hot-rolled instead of cold-rolled
Hot-rolled base stock before cold-reduction falls in heading 7208.
If imported as complete steel drums or containers
Finished containers from blackplate classify as reservoirs in heading 7309.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include chemical composition analysis proving nonalloy steel (not high-strength per US Note 72(a)) to prevent reclassification
• Document annealing process details; improper heat treatment may shift to other subheadings
• Watch for partial rust—no duty allowance per Chapter notes; ensure proper packaging during ocean transit
Related Products under HTS 7209.18.25.20
MR Type Annealed Blackplate Steel Coil
Matte finish (MR grade) annealed blackplate coils, cold-rolled to <0.361 mm thickness and >600 mm width, for general line tinplate production. The annealing eliminates cold work hardening while maintaining surface suitable for subsequent electrolytic coating. HTS 7209.18.25.20 covers this uncoated, cold-rolled annealed product in coils.
Annealed Blackplate for Aerosol Can Stock
Special annealed blackplate coils under 0.361 mm for aerosol spray cans, providing necessary necking and flanging properties. Cold-rolled nonalloy steel in wide coils meets exacting thickness tolerances. HTS 7209.18.25.20 applies to this uncoated annealed intermediate product.
Prime Quality Annealed Blackplate Coil
High-quality prime annealed blackplate steel coils (<0.361 mm x >600 mm) free of surface defects for tinplate conversion. Annealing provides uniform soft temper (T1-T3) ideal for container fabrication. Precisely matches HTS 7209.18.25.20 specifications for cold-rolled annealed blackplate.
TFS Blackplate Precursor Annealed Coil
Annealed blackplate coils designed as precursor for Tin Free Steel (TFS), chemically treated post-import but imported bare. Ultra-thin gauge (<0.361 mm) ensures proper electrolytic chromium application later. HTS 7209.18.25.20 as uncoated cold-rolled annealed product.
Annealed Blackplate Steel Coil for Can Manufacturing
Cold-rolled, annealed flat-rolled nonalloy steel coil under 0.361 mm thick and 600 mm wide, specifically blackplate used primarily for metal can bodies and ends. The annealing process softens the steel after cold-rolling, improving formability for deep drawing in can production. Falls under HTS 7209.18.25.20 as cold-rolled, not further worked, annealed blackplate in coils.
Double Reduced Annealed Blackplate Coil
DR (double reduced) blackplate steel coils, cold-rolled twice then annealed, achieving <0.361 mm thickness for premium can stock. Second reduction provides smoother surface before final annealing for optimal formability. Fits HTS 7209.18.25.20 as cold-rolled, annealed, not further worked.